The real-time performance monitoring (RPM) information includes the round-trip time, jitter, and standard deviation values for each configured RPM test on the Services Router. To view these RPM properties, select Monitor>RPM in the J-Web interface.
Table 84 shows a summary of the information displayed on the RPM page and the corresponding CLI show command you can enter at the J-Web CLI terminal.
Table 84: RPM Information and Corresponding CLI show Command
Information Displayed |
Corresponding CLI Command |
|---|---|
Results of the most recent RPM probes. |
show services rpm probe-results |
In addition to the RPM statistics for each RPM test, the J-Web interface displays the round-trip times and cumulative jitter graphically. Figure 1 shows sample graphs for an RPM test.
Figure 2: Sample RPM Graphs
In Figure 1, the round-trip time and jitter values are plotted as a function of the system time. Large spikes in round-trip time or jitter indicate a slower outbound (egress) or inbound (ingress) time for the probe sent at that particular time.
 |
Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |