[Prev][Next][Report an Error]

Creating a Client Configuration—Quick Configuration (Dynamic VPNs)

You can use J-Web Quick Configuration to quickly create or modify a client configuration that downloads to the user’s computer along with the Access Manager client.

Before You Begin

For background information, read:

  • "Dynamic Virtual Private Networks (VPNs)" chapter in the JUNOS Software Security Configuration Guide.

Figure 86: Client Configuration Quick Configuration Page

Client Configuration
Quick Configuration Page

Figure 86 shows the Quick Configuration page where you create a new client configuration.

To create or modify a client configuration with Quick Configuration:

  1. Select Configuration>Quick Configuration>Dynamic VPN>Global Settings.
  2. To modify an existing configuration, click the appropriate link in the Client VPN Configuration column to go to the configuration page. Or, select the client configuration from among those listed and click one of the following buttons:
  3. To create a new client configuration, click Add.
  4. Fill in the options as described in Table 143.
  5. Click one of the following buttons:

Table 143: Client VPN Configuration Options

Field

Function

Action

Client Configuration

Name

Name to identify the client configuration.

Enter a name.

IPSec VPN

IKE AutoKey configuration to use when establishing the VPN tunnel.

Select a previously created IKE AutoKey configuration.

Remote Address

Remote Sources IP

IP address and netmask of a resource behind the firewall. Traffic to the specified resource will go through the VPN tunnel and therefore will be protected by the firewall’s security policies.

Note: The device does not validate that the IP/netmask combination that you enter here matches up with your security policies.

Enter an IP address and netmask and click Add.

Remote Exceptions IP

IP address and netmask of exceptions to the remote protected resources list.

Enter an IP address and netmask and click Add.

Users

Users

List of users that can use this client configuration.

Note: The server does not validate the names that you enter here, but the names must be the names that the users use to log onto the device when downloading the client.

Enter a user name and click Add.


[Prev][Next][Report an Error]