[Prev][Report an Error]

Packet Capture Results and Output Summary

Figure 119 shows J-Web packet capture output from router1, with the level of detail set to brief. Table 188 summarizes the output in the packet capture display.

Figure 119: Packet Capture Results Page

Packet Capture Results
Page

Table 188: J-Web Packet Capture Results and Output Summary

Field

Description

timestamp

Time when the packet was captured. The timestamp 00:45:40.823971 means 00 hours (12.00 a.m.), 45 minutes, and 40.823971 seconds.

Note: The time displayed is local time.

direction

Direction of the packet. Specifies whether the packet originated from the Routing Engine (Out), or was destined for the Routing Engine (In).

protocol

Protocol for the packet.

In the sample output, IP indicates the Layer 3 protocol.

source address

Hostname, if available, or IP address and the port number of the packet's origin. If the Don't Resolve Addresses check box is selected, only the IP address of the source is displayed.

Note: When a string is defined for the port, the packet capture output displays the string instead of the port number.

destination address

Hostname, if available, or IP address of the packet's destination with the port number. If the Don't Resolve Addresses check box is selected, only the IP address of the destination and the port are displayed.

Note: When a string is defined for the port, the packet capture output displays the string instead of the port number.

protocol

Protocol for the packet.

In the sample output, TCP indicates the Layer 4 protocol.

data size

Size of the packet (in bytes).


[Prev][Report an Error]