[Prev][Next][Report an Error]

Monitoring IGMP Snooping

To view information about the IGMP snooping parameters, select Monitor>Enhanced Switching>IGMP-Snooping in the J-Web interface or enter the following CLI commands:

show igmp-snooping vlans
show igmp-snooping route

Table 4 summarizes the IGMP Snooping output fields.

Table 4: Summary of IGMP Snooping Output Fields

Field	Values	Additional Information
VLAN	The VLAN for which IGMP snooping is enabled.
Interfaces	Indicates the number of interfaces in the VLAN.
Groups	Indicates the multicast groups learned by the VLAN.
MRouters	Indicates the MRouters learned by the VLAN.
Receivers	Specifies the multicast receiver.
Group	Indicates the multicast groups learnd by the VLAN.
Next-Hop	The next hop assigned by the switch after performing the route lookup.

[Prev][Next][Report an Error]