[Prev][Next][Report an Error]

J-Web Quick Configuration

To configure local list antispam using the J-Web Quick Configuration editor, you must first create your local white and black list custom objects.

Configure a URL Pattern List Custom Object as follows:

  1. Select the Configuration tab at the top of the page.
  2. Select UTM in the left pane, under Quick Configuration, to expand the UTM category. Once UTM is expanded, Anti-Virus, Web Filtering, Anti-Spam, Content Filtering, and Custom Objects become available.
  3. Select Custom Objects in the left pane.
  4. In the right pane, under URL Pattern List, click the Add button to create URL pattern lists. See Figure 79.

    Figure 79: Custom Object, URL Pattern List, Quick Configuration

     Custom Object, URL Pattern List,
Quick Configuration

  5. Next to URL Pattern Name, enter a unique name for the list you are creating. If you are creating a white list, it is helpful to indicate this in the list name. The same applies to a black list. The name you enter here becomes available in the Address Whitelist and Address Blacklist fields when you are configuring your antispam profiles.
  6. Under Values, in the box next to the Add button, enter the URL pattern for white list or black list antispam filtering.

    Note: URL pattern wildcard support— The wildcard rule is as follows: \*\.[]\?* and you must precede all wildcard URLs with http://. You can only use “*” if it is at the beginning of the URL and is followed by a “.”. You can only use “?” at the end of the URL.

    The following wildcard syntax IS supported: http://*.juniper.net, http://www.juniper.ne?, http://www.juniper.n??. The following wildcard syntax is NOT supported: *.juniper.net , www.juniper.ne?, http://*juniper.net, http://*.

  7. Click the Add button to add your URL pattern to the Values list box. Within this box, you can select an entry and use the up and down arrows to change the order of the list. You can also select an entry and use the X button to delete it from the list. The list can contain up to 8192 items.
  8. Click OK. See Figure 80. Clicking the OK button takes you back to the main configuration page.

    Figure 80: Custom Object, URL Pattern Configuration, Quick Configuration

    Custom Object, URL Pattern Configuration,
Quick Configuration

  9. Under URL Pattern List, select the check box beside the pattern list you created.
  10. Click Apply.

Note: Because you use URL Pattern Lists to create Custom URL Category Lists, you must configure URL Pattern List Custom Objects before you configure a Custom URL Category List. URL Pattern List Custom Objects are described in the previous section.

Configure a Custom URL Category List Custom Object as follows:

  1. Select the Configuration tab at the top of the page.
  2. Select UTM in the left pane, under Quick Configuration, to expand the UTM category. Once UTM is expanded, Anti-Virus, Web Filtering, Anti-Spam, Content Filtering, and Custom Objects become available.
  3. Select Custom Objects in the left pane.
  4. In the right pane, under Custom URL Category List, click the Add button to create a URL white list.
  5. Next to Category Name, enter a unique name for the list you are creating. This name appears in the Address Whitelist list when you configure an antispam profile.
  6. Under Values, in the box next to the Add button, select a URL Pattern List name from the list for bypassing scanning.
  7. Click the Add button to add your entry to the Values list box. Within this box, you can select an entry and use the up and down arrows to change the order of the list. You can also select an entry and use the X button to delete it from the list. Continue to add URLs or IP addresses in this manner.
  8. Click the OK button to save the selected values as part of the custom URL list you have created.
  9. Under URL Category List, select the check box beside the extension list you created.
  10. Click Apply.

Now that you have created your white list and black list custom objects, you can configure antispam filtering to use those lists:

  1. Select the Configuration tab at the top of the page.
  2. Select UTM in the left pane, under Quick Configuration, to expand the UTM category. Once UTM is expanded, Anti-Virus, Web Filtering, Anti-Spam, Content Filtering, and Custom Objects become available.
  3. Select Anti-Spam in the left pane.
  4. In the right pane, under Anti-Spam global options, select an Address Whitelist and/or an Address Blacklist from the list for local lists for spam filtering. These lists are configured as Custom Objects and are made available for selection here.
  5. Under Anti-Spam profiles, click the Add button to configure a profile for the Symantec SBL server. This takes you to the profile configuration page.
  6. In the Profile Name box, enter a unique name for the antispam profile you are creating.
  7. If you are using the default server, select the check box beside Symantec default SBL server. If you are not using the default server, leave the check box unselected. If you do not select this check box, you are disabling server-based spam filtering. You would disable it if you are using only local lists or if you do not have a license for server-based spam filtering. If you are using the Symantec default SBL server, refer to .
  8. In the Anti-spam action list, select one of the following: Tag subject of e-mail, Block e-mail, or Tag header of e-mail. Here you are selecting the action to be taken by the device when spam is detected.
  9. In the Custom tag string box, enter a custom string for identifying a message as spam. By default, the devices uses ***SPAM***.
  10. Click OK to save your profile. See Figure 81. (This takes you back to main antispam configuration page. Under Anti-Spam profiles, the profile you created is now listed. See Figure 82.)

    Figure 81: Antispam Local List Configuration, Quick Configuration

    Antispam Local List Configuration,
Quick Configuration

  11. Under Anti-Spam profiles, select the check box for the profile you are using.
  12. Click Apply. See Figure 82.

    Figure 82: Antispam Profile Selection, Quick Configuration

    Antispam Profile Selection, Quick
Configuration


[Prev][Next][Report an Error]