[Report an Error]

Configuring Policies for UTM using J-Web Quick Configuration

Configure a UTM policy for Antivirus, Antispam, Content Filtering, and Web Filtering to which you attach the specific UTM feature profile you have already configured. Configure a UTM policy as follows:

  1. Select Security Policies > UTM Policies.
  2. Click Add.
  3. In the Policy Name box, enter a unique name for the UTM policy you are creating.
  4. Scroll down the page and locate the profile list for the feature for which you are creating the policy. (For example, an HTTP Profile for Web Filtering.) From the pulldown list, select the profile you are attaching to this UTM policy. (Note that you can attach several profiles for multiple features to one UTM policy.)
  5. In the Session Per Client Over Limit list, select one of the following: Log and Permit, Block. This is the action the device takes when the session per client limit for this UTM policy is exceeded.
  6. In the Session Per Client Limit box, enter a session per client limit from 0 to 20000 for this UTM policy.
  7. Click OK. This takes you back to the UTM Policies page.
  8. Select the check box in the UTM Policy table for the policy you are using.
  9. Click Apply.

    Next, you attach the UTM policy to a FW / VPN security policy.


[Report an Error]