[Prev][Next][Report an Error]

Configuring Addresses and Address Sets—Quick Configuration

You can use J-Web Quick Configuration to quickly configure address books and address sets.

To configure addresses and address sets with Quick Configuration:

  1. Select Configuration > Quick Configuration > Security Policies > Address Books.
  2. Select the zone for which you want to configure address books.
  3. Click Add to add IP addresses to the address book. See Figure 47.

    Figure 47: Quick Configuration Policies Page for Address Books

    Quick Configuration Policies Page for
Address Books

  4. Specify an address name.
  5. Specify either an IP address or a DNS name. The IP address must be an IPv4 address with the number of prefix bits. You can use domain names only if the system is configured to use DNS services.
  6. Click one of the following buttons:
  7. Continue adding addresses using Step 2 through Step 5. Once you have the addresses you need to create an address set, select the Address Sets tab.
  8. Click Add. See Figure 48.

    Figure 48: Configuring Address Sets

    Configuring Address Sets

  9. Specify an Address Set name.
  10. To add the predefined addresses in the “ Addresses in this set” column, use the left and right arrows.
  11. Click OK to save the configuration and return to the main Configuration page.

[Prev][Next][Report an Error]