Configuring CoS with Quick Configuration

The Class of Service Quick Configuration pages allow you to configure most of the JUNOS CoS components for the IPv4 and MPLS traffic on a J-series or SRX-series device. You can configure forwarding classes for transmitting packets, define which packets are placed into each output queue, schedule the transmission service level for each queue, and manage congestion using a random early detection (RED) algorithm. After defining the CoS components you must assign classifiers to the required physical and logical interfaces.

This section contains the following topics:

• Defining CoS Components
• Defining CoS Value Aliases
• Defining Forwarding Classes
• Defining Classifiers
• Defining Rewrite Rules
• Defining Schedulers
• Defining Virtual Channel Groups
• Assigning CoS Components to Interfaces

Copyright © 2008, Juniper Networks, Inc. All Rights Reserved. Trademark Notice.