[Prev][Next][Report an Error]

Adding a New IDP Policy—Quick Configuration

You can use J-Web Quick Configuration to quickly configure and add a new IDP policy.

Figure 54: Quick Configuration Page for Adding a New IDP Policy

Quick Configuration
Page for Adding a New IDP Policy

To configure a new IDP policy with Quick Configuration:

  1. Select Configuration > Quick Configuration > Security Policies > IDP.
  2. From the IDP Policies page, click Add to add a new IDP policy.

    Figure 54 shows the Quick Configuration page for adding a new IDP policy.

  3. Fill in the information as described in Table 134.
  4. Click one of the following buttons:

Table 134: Adding a New IDP Policy Quick Configuration Page Summary

Field

Function

Actions

Policy Name  

Policy Name

Specifies the name of the IDP policy.

Type a policy name.

Set as active policy

Specifies if the configured IDP policy is set as the active policy.

Select the check box.

IPS Rulebase

Defines the IPS rulebase to protect the network from attacks by using attack objects to detect known and unknown attacks.

Click Add under IPS Rulebase to add a new IPS rulebase to the IDP policy.

For more information, see Adding an IPS Rulebase—Quick Configuration.

Exempt Rulebase

Defines the exempt rulebase to exclude known false positives or to exclude a specific source, destination, or source/destination pair from matching an IPS rule.

Click Add under Exempt Rulebase to add an exempt rulebase to the IDP policy.

For more information, see Adding an Exempt Rulebase—Quick Configuration.


[Prev][Next][Report an Error]