[Prev][Next][Report an Error]

Monitoring Static NAT Information

To view static Network Address Translation table information, select Monitor>Firewall/NAT>Static NAT in the J-Web interface, or enter the following CLI command:

Table 48 summarizes key output fields in the static NAT display.

Table 48: Summary of Key Static NAT Output Fields



Additional Information

Static NAT Summary Table

Total mappings

Number of static NAT entries in the table.



Maximum number of static NAT entries possible.


Ingress interface

Name of the interface on which static NAT is defined.



Destination IP address and subnet mask.



Host IP address and subnet mask mapped to the destination IP address and subnet mask.


Virtual router

Name of the virtual router that performs route lookup for the host IP address and subnet mask.


[Prev][Next][Report an Error]