[Prev][Next][Report an Error]

MPLS

To view information about MPLS label-switched paths (LSPs) and virtual private networks (VPNs), select Monitor>MPLS.

Table 78 shows a summary of the information displayed on MPLS pages and the corresponding CLI show commands you can enter at the J-Web CLI terminal.

Table 78: MPLS Information and Corresponding CLI show Commands

Information Displayed

Corresponding CLI Command

Interfaces

Interfaces on which MPLS is enabled, plus the operational state and any administrative groups applied to an interface.

show mpls interface

LSP Information

LSP sessions currently active on the Services Router, including inbound (ingress) and outbound (egress) addresses, LSP state, and LSP name.

show mpls lsp

LSP Statistics

Statistics for LSP sessions currently active on the Services Router, including the total number of packets and bytes forwarded through an LSP.

show mpls lsp statistics

RSVP Sessions

RSVP-signaled LSP sessions currently active on the Services Router, including inbound (ingress) and outbound (egress) addresses, LSP state, and LSP name.

show rsvp session

RSVP Interfaces

Interfaces on which RSVP is enabled, including the interface name, total bandwidth through the interface, and total current reserved and reservable (available) bandwidth on the interface.

show rsvp interface


[Prev][Next][Report an Error]