[Prev][Report an Error]

Ping MPLS Results and Output

Table 152 summarizes the output in the ping MPLS display. If the Services Router receives no responses from the destination host, review the list after Table 152 for a possible explanation.

Table 152: J-Web Ping MPLS Results and Output Summary



Exclamation point (!)

Echo reply was received.

Period (.)

Echo reply was not received within the timeout period.


Echo reply was received with an error code. Errored packets are not counted in the received packets count and are accounted for separately.

number packets transmitted

number—Number of ping requests (probes) sent to a host.

number packets received

number—Number of ping responses received from a host.

percentage packet loss

percentage—Number of ping responses divided by the number of ping requests, specified as a percentage.


For Layer 2 circuits only, the number of milliseconds required for the ping packet to reach the destination. This value is approximate, because the packet has to reach the Routing Engine.

If the Services Router does not receive ping responses from the destination host (the output shows a packet loss of 100 percent), one of the following explanations might apply:

[Prev][Report an Error]