You can use J-Web Quick Configuration to quickly configure an IPSec policy.
Before You Begin |
For background information, read Configuring an IKE Phase 1 Proposal—Quick Configuration |
To configure an IPSec policy with Quick Configuration:
The figure below shows the quick configuration page where you can select an existing policy, or click Add to create a new one.
Figure 61: IPSec Policy Configuration
To use an existing policy, select one from among those listed and click one of the following buttons:
The figure below shows the quick configuration page where you create a new IPSec policy.
Figure 62: IPSec Policy Configuration
Click one of the following buttons:
Table 127: IPSec Policy Configuration Options