[Prev][Next][Report an Error]

Configuring an IKE Policy, Authentication, and Proposal—Quick Configuration

You can use J-Web Quick Configuration to quickly configure an IKE policy, authentication, and to reference a proposal.

Before You Begin

For background information, read Configuring an IKE Phase 1 Proposal—Quick Configuration

To configure an IKE policy with Quick Configuration:

  1. Select Configuration > Quick Configuration > VPN > IKE.

    The figure below shows the quick configuration page where you can select an existing policy, or click Add to create a new one.

    Figure 55: IKE Policy Configuration

    IKE Policy Configuration

  2. Select IKE Policy tab if it is not selected.
  3. To use an existing policy, select it from among those listed and click one of the following buttons:

  4. To configure a new IKE policy, authentication, and to reference a proposal, click Add.

    The figure below shows the quick configuration page where you create a new IKE policy.

    Figure 56: IKE Policy, Authentication, and Proposal Configuration

    IKE Policy, Authentication, and Proposal Configuration

  5. Fill in the options as described in the table below.
  6. Click one of the following buttons:

Table 124: IKE Policy, Authentication, and Proposal Options

Field

Function

Action

IKE Policy

Name

Name of the policy.

Enter a name.

Descripton

Descripton of the policy.

Enter a description.

Mode

Use Main or Aggressive mode.

Select a mode.

Pre shared key

Use one of the following preshared key types:

  • ASCII text
  • Hexadecimal

Click Pre shared key, click the type of key, and enter the key in the appropriate format.

Certificate

Use certificates

Click Certificate.

Local Certificate

Use a particular certificate when the local router has multiple loaded certificates.

Enter a local certificate identifier.

Peer Certificate Type

Use a preferred type of certificate (PKCS7 or X509).

Select a certificate type.

Trusted CA

Use a trusted certificate authority.

Click None or Use all, or click Ca index and select from the list.

Proposal

None

Do not use proposals

Click None.

Predefined

Use one of the following types of predefined Phase 1 proposals:

  • Basic
  • Compatible
  • Standard

Click Predefined and select a proposal type.

User Defined

Use a user-defined Phase 1 Proposal.

Click User Defined, select a proposal from the pop-up menu, and click Add.


[Prev][Next][Report an Error]