[Prev][Report an Error]

Configuring Applications and Application Sets—Quick Configuration

You can use J-Web Quick Configuration to quickly configure application and application sets for a security policy.

Before You Begin
  1. Configure zones. For more information, see Configuring Security Zones—Quick Configuration
  2. Configure address books. For more information, see Configuring Addresses and Address Sets—Quick Configuration

To configure applications and application sets with Quick Configuration:

  1. Select Configuration > Quick Configuration > Security Policies > Applications / Application Sets.
  2. Select the Application Sets tab. See the figure below.

    Figure 48: Quick Configuration Page for Configuring Applications or Application Sets

    Quick Configuration Page for Configuring Applications
or Application Sets

  3. Click Add. The Add an Application Set window displays, as shown in the figure below.

    Figure 49: Quick Configuration Page for Configuring Applications or Application Sets

    Quick Configuration Page for Configuring Applications
or Application Sets

  4. Enter an application set name (name for one or a group of pre-configured applications).
  5. Use the left and right arrows to add or remove applications from the Applications in this set column.
  6. Click one of the following buttons:

[Prev][Report an Error]