[Prev][Next][Report an Error]

Configuring the DNS Proxy Service with Quick Configuration

The DNS Proxy Quick Configuration page allows you to enable the interfaces for DNS, add DNS servers to the selection table, and add static cache entries. From the DNS Quick Configuration page, click the tabs to configure the interfaces list, selection table, and static cache list. You can configure multiple interfaces, server-selections, and cache entries from these Quick Configuration pages.

Figure 80 through Figure 83 show the DNS Proxy Service Quick Configuration pages.

Figure 80: DNS Proxy Quick Configuration Page

DNS Proxy Quick Configuration
Page

Figure 81: Adding an Interface Page

Adding an Interface Page

Figure 82: Adding a DNS Server Page

Adding a DNS Server Page

Figure 83: Adding a Cache Entry Page

Adding a Cache Entry Page

To configure the DNS proxy service with Quick Configuration:

In the J-Web user interface, select Configuration > Quick Configuration > DNS Proxy.
From DNS Proxy Service Quick Configuration page, click the tabs to go to the respective pages.
From each of the tabs pages, click Add and enter information into the respective Quick Configuration page as described in Table 136.
On each DNS Proxy Service Quick Configuration page, click one of the following buttons:
- To apply the configuration and stay on the current Quick Configuration page, click Apply.
- To apply the configuration and return to the previous Quick Configuration page, click OK.
- To cancel your entries and return to the previous Quick Configuration page, click Cancel.

Table 136: DNS Proxy Service Quick Configuration Summary

Field	Function	Your Action
Enabling an Interface for DNS
Interfaces proxy DNS runs on	Lists the interfaces enabled to run DNS proxy.	To add an interface, click Add. Do one of the following: To enable an interface to run DNS proxy, select the check box corresponding to the interface and click Add. To remove an interface, select the check box corresponding to the interface, and click Delete.
Adding a DNS Server
Selection List	Specifies the list of configured servers.	Type a number between 0 and 30,000. Under Selection List, click Add.
Name (required)	Specifies the name of the server on which you want to configure the DNS proxy.	Type the name of the server.
Domain Name (required)	Specifies the domain name that is mapped to a set of name servers.	Type the domain name that is mapped to the server.
Name Server List (required)	Specifies a list of name servers the device can use to resolve domain names that are not associated with any configured name server.	Do one of the following: Select the name server to be mapped to a domain name. The domain name must be configured with DHCP. For more information about configuring a domain name with DHCP, see the JUNOS Software with Enhanced Services Administration Guide. To add a new server, type the IP address of the server and click Add.
Adding a Static Cache Entry
Static Cache List	Specifies the list of cache entries.	Under Static Cache List, click Add.
Host Name	Specifies the hostname of the server that hosts the DNS proxy cache.	Type the hostname of the server.
IP Address	Specifies the IP address of the server that hosts the DNS proxy cache.	Type the IP address.

[Prev][Next][Report an Error]