[Prev][Next][Report an Error]

Index

Symbols  Numbers  A  B  C  D  E  F  G  H  I  J  L  M  N  O  P  Q  R  S  T  U  V  W  X

Symbols

/cf/var/crash directory    See crash files    
/cf/var/log directory    See system logs    
/cf/var/tmp directory    See temporary files    
/config directory    
snapshots for boot directories (J-Web)    

Numbers

10-Gigabit Ethernet ports    
802.3ad    
aggregated Ethernet    
MAC address learning    
MTU    
Quick Configuration    
source filtering, for MAC addresses    
autonegotiation    
flow control    
source filtering    
TPIDs    
logical interfaces    
802.3ad, 10-Gigabit Ethernet    

A

AAL5 multiplex encapsulation    
ATM-over-ADSL interfaces    
ATM-over-SHDSL interfaces    
access, configuration summary    
access concentrator    
naming for PPPoE (Quick Configuration)    
access privileges    
specifying (Quick Configuration)    
accounting options    
configuration summary    
sample task    
active alarms    See alarms, active    
active routes, displaying    
Add a RADIUS Server page    
field summary    
Add a TACACS+ Server page    
field summary    
Add a User Quick Configuration page    
field summary    
Add button    
Add new entry link    
addresses    
BGP local address (Quick Configuration)    
BGP peer address (Quick Configuration)    
destination, displaying    
address resolution protocol    See ARP; static ARP entries    
ADSL2+ operating mode    
advanced BGP feature, license    
aggregated Ethernet, on 10-Gigabit Ethernet ports    
alarm class    See alarm severity    
alarms    
active, checking    
displaying for chassis    
displaying for interfaces    
monitoring    
red J-Web indicator    
severity    See alarm severity    
alarm severity    
action required    
displaying    
Alarms Summary page    
alias, CoS value    
ambient temperature, monitoring    
AMI (alternate mark inversion) encoding    
E1    
T1    
Annex A PIMs    
G.SHDSL PIMs, setting annex type on    
operating modes (Quick Configuration))    
Annex B PIMs    
G.SHDSL PIMs, setting annex type on    
operating modes (Quick Configuration)    
ANSI DMT operating mode    
ANSI T1.413 Issue II operating mode    
applications, configuration summary    
Apply button    
ARP (address resolution protocol), for static ARP entries    
publish (responding to ARP requests), on Fast Ethernet subnets    
publish (responding to ARP requests), on Gigabit Ethernet subnets    
for Fast Ethernet subnets    
See also static ARP entries    
for Gigabit Ethernet subnets    
See also static ARP entries    
AS path, displaying    
ASs (autonomous systems)    
AS number (Quick Configuration)    
ATM NLPID encapsulation    
ATM-over-ADSL interfaces    
ATM-over-SHDSL interfaces    
ATM node reachability    
ping ATM (J-Web)    
ATM-over-ADSL interfaces    
encapsulation types, logical (Quick Configuration)    
encapsulation types, physical (Quick Configuration)    
operating modes (Quick Configuration)    
Quick Configuration    
VCI    
VPI    
logical properties (Quick Configuration)    
ATM-over-SHDSL interfaces    
1-port four-wire mode, setting    
2-port two-wire mode, setting    
annex type, setting    
encapsulation types, logical (Quick Configuration)    
encapsulation types, physical    
encapsulation types, physical (Quick Configuration)    
line speed    
loopback testing    
Quick Configuration    
SNEXT threshold    
SNR margin    
VCI    
VPI    
logical properties (Quick Configuration)    
ATM PPP over AAL5 LLC encapsulation    
ATM-over-ADSL for PPP-over-ATM (PPPoA) interfaces    
ATM-over-SHDSL interfaces    
ATM PVC encapsulation    
ATM-over-ADSL interfaces    
ATM-over-SHDSL interfaces    
ATM SNAP encapsulation    
ATM-over-ADSL interfaces    
ATM-over-SHDSL interfaces    
ATM VC multiplex encapsulation    
ATM-over-ADSL interfaces    
ATM-over-SHDSL interfaces    
authentication    
adding a RADIUS server (Quick Configuration)    
adding a TACACS+ server (Quick Configuration)    
local password, by default    
specifying access privileges (Quick Configuration)    
specifying a method (Quick Configuration)    
autonegotiation, 10-Gigabit Ethernet    
autonegotiation, Gigabit Ethernet    
auto operating mode    

B

backbone area    
area ID (Quick Configuration)    
area type (Quick Configuration)    
backup    
boot device    
current configuration    
rescue configuration    
system software    
basic connectivity    
Quick Configuration    
requirements    
selecting    
BGP (Border Gateway Protocol)    
enabling (Quick Configuration)    
local address (Quick Configuration)    
monitoring    
peer address (Quick Configuration)    
Quick Configuration    
statistics    
status    
AS number (Quick Configuration)    
See also ASs (autonomous systems), AS number    
peer AS number (Quick Configuration)    
router ID (Quick Configuration)    
BGP groups, displaying    
BGP neighbors    
displaying    
BGP page    
BGP peers    See BGP neighbors    
peer address (Quick Configuration)    
peer AS number (Quick Configuration)    
BGP routing information    
BGP sessions, status    
boot devices    
configuring (J-Web)    
selecting (J-Web)    
buffer space, for PIM (in FPC summary)    
built-in Ethernet ports    See Ethernet ports; management interfaces    
buttons    
Add (Quick Configuration)    
Apply (Quick Configuration)    
Cancel (J-Web configuration editor)    
Cancel (Quick Configuration)    
Commit (J-Web configuration editor)    
Delete (Quick Configuration)    
Discard (J-Web configuration editor)    
OK (J-Web configuration editor)    
OK (Quick Configuration)    
Refresh (J-Web configuration editor)    
bytes transmitted    

C

cables    
T1 cable length    
T3 cable length    
calling number, ISDN    
Cancel button    
J-Web configuration editor    
Quick Configuration    
C-bit parity frame format    
enable or disable on T3 ports    
certificates    See SSL certificates    
Challenge Handshake Authentication Protocol    See CHAP    
CHAP (Challenge Handshake Authentication Protocol)    
enabling for PPPoE (Quick Configuration)    
enabling on E1    
enabling on E3    
enabling on serial interfaces    
enabling on T1    
enabling on T3    
E1 local identity    
E3 local identity    
serial interface local identity    
T1 local identity    
T3 local identity    
local identity    
CHAP secret    See CHAP, local identity    
chassis    
alarm condition indicator    
alarms, displaying    
component part numbers    
component serial numbers    
configuration summary    
environment, displaying    
FPC (PIM) summary, displaying    
identifiers, displaying    
monitoring    
PIM (FPC) summary, displaying    
power management    
temperature, monitoring    
chassis viewer    
checksum    
E1 frame    
E3 frame    
T1 frame    
T3 frame    
Cisco NLPID encapsulation    
ATM-over-ADSL interfaces    
ATM-over-SHDSL interfaces    
classifiers    
adding and editing (Quick Configuration)    
assigning to logical interfaces (Quick Configuration)    
defining (Quick Configuration)    
summary (Quick Configuration)    
classifiers, CoS    
class of service (CoS)    
configuration summary    
monitoring    
Class of Service classifiers page    
field summary    
Class of Service Cos value aliases page    
field summary    
Class of Service forwarding classes page    
field summary    
Class of Service initial page    
Class of Service Interfaces page    
field summary    
Class of Service RED drop profiles page    
field summary    
Class of Service rewrite rules page    
field summary    
Class of Service scheduler maps page    
field summary    
Class of Service schedulers page    
field summary    
Class of Service virtual channel groups page    
field summary    
cleaning up files    
Clean Up Files page    
CLI    See JUNOS CLI    
clickable configuration    See J-Web configuration editor    
CLI terminal    
overview    
requirements    
starting    
clocking    
serial interface, inverting the transmit clock    
E1    
E3    
serial interface    
T1    
T3    
clock rate, serial interface    
values    
code point aliases, CoS    
command-line interface    See JUNOS CLI    
Commit button    
committed configuration    
comparing two configurations    
methods    
rescue configuration    
summaries    
compact flash    
displaying size    
displaying usage    
components    
part numbers    
serial numbers    
configuration    
alarm condition indicator    
basic    
committing    
committing as a text file, with caution    
discarding changes    
downgrading software (J-Web)    
downloading    
editing    
editing as a text file, with caution    
history    
See also configuration history    
interfaces, displaying    
loading previous    
managing files    
rollback    
upgrading (J-Web)    
uploading    
users-editors, viewing    
viewing as a text file    
configuration database, displaying size    
configuration database, summary    
configuration history    
comparing files    
database summary    
displaying    
downloading files    
summary    
users-editors, viewing    
Configuration History page    
configuration sample tasks    
accounting options    
configuration text    
editing and committing, with caution    
viewing    
configure link    
Confirm File Delete page    
congestion control    
with CoS schedulers (Quick Configuration)    
connectivity    
regaining lost DHCP lease after initial configuration    
CoS    See class of service    
CoS (class of service)    
assigning components to interfaces (Quick Configuration)    
classifiers    See classifiers    
configuration tasks (Quick Configuration)    
CoS value aliases    See CoS value aliases    
defining components (Quick Configuration)    
forwarding classes    See forwarding classes    
interfaces    
interfaces, assigning components to (Quick Configuration)    
loss priority    
packet loss priority    
Quick Configuration    
RED drop profiles    See RED drop profiles    
rewrite rules    See rewrite rules    
scheduler maps    See scheduler maps    
schedulers    See schedulers    
virtual channel groups (Quick Configuration)    
See also virtual channels    
CoS value aliases    
adding (Quick Configuration)    
summary (Quick Configuration)    
CPU usage    
PIM (in FPC summary)    
CPU usage, displaying    
crash files    
cleaning up (J-Web)    
displaying size    
downloading (J-Web)    
crash files, cleaning up    
customer support    
contacting JTAC    
hardware information for    

D

Database Information page    
data inversion    
E1    
T1    
data link switching (DLSw), license    
default gateway    
defining (Quick Configuration)    
default gateway, static routing    
Delete button    
Delete Configuration Below This Point option button    
delete link    
deleting    
crash files (J-Web)    
files, with caution    
log files (J-Web)    
temporary files (J-Web)    
licenses (J-Web)    
deleting a current rescue configuration    
destination address, displaying    
Deutsche Telekom UR-2 operating mode    
DHCP (Dynamic Host Configuration Protocol)    
monitoring    
DHCP server    
regaining lost lease after initial configuration    
diagnose    
CLI terminal    
network connectivity    
packet capture    
ping ATM    
ping host    
ping MPLS    
traceroute    
diagnose sample task    
diagnosis    
packet capture (J-Web)    
ping ATM (J-Web)    
ping host (J-Web)    
traceroute (J-Web)    
viewing active alarms    
dial backup    
configuring (Quick Configuration—ISDN BRI)    
interfaces to back up (Quick Configuration)    
selecting (Quick Configuration—ISDN BRI)    
dialer interface, ISDN    
multiple, ensuring different IPv4 subnBRI et addresses on    
dialer interface, ISDN BRI (Quick Configuration)    
dialer options, ISDN    
for ISDN BRI service    
dialer pools, ISDN    
Quick Configuration    
dialer watch    
configuring (Quick Configuration—ISDN BRI)    
selecting (Quick Configuration—ISDN BRI)    
watch list (Quick Configuration)    
DiffServ code points, bits for RPM probes    
Discard All Changes option button    
Discard button    
Discard Changes Below This Point option button    
discarded packets    
discarding configuration changes    
DNS (Domain Name System) server address, displaying    
DNS server    
defining (Quick Configuration)    
documentation set    
comments on    
domain name    
defining (Quick Configuration)    
Domain Name System address, displaying    
domain search    
defining (Quick Configuration)    
downgrading    
software, with J-Web    
downgrading JUNOS software    
downloading    
crash files (J-Web)    
licenses (J-Web)    
log files (J-Web)    
temporary files (J-Web)    
downloading configuration files    
DRAM, for PIM (in FPC summary)    
dropped packets    
drop probabilities, CoS    
drop profiles    See CoS; RED drop profiles    
drop profiles, CoS    
DS1 ports    See E1 ports; T1 ports    
DS3 ports    See E3 ports; T3 ports    
DSCPs (DiffServ code points), bits for RPM probes    

E

E1 interfaces    
Quick Configuration    
E1 ports    
CHAP    
clocking    
data inversion    
encapsulation type    
frame checksum    
framing    
logical interfaces    
MTU    
Quick Configuration    
time slots    
E3 interfaces    
Quick Configuration    
E3 ports    
CHAP    
clocking    
encapsulation type    
frame checksum    
logical interfaces    
MTU    
Quick Configuration    
Edit Configuration page    
Edit Configuration Text page    
editing a configuration    
edit link    
encapsulation type    
ATM-over-ADSL logical interfaces    
ATM-over-ADSL physical interfaces    
ATM-over-SHDSL logical interfaces    
ATM-over-SHDSL physical interfaces    
E1    
E3    
serial interfaces    
T1    
T3    
Ethernet interfaces    
Quick Configuration    
See also 10-Gigabit Ethernet ports    
See also Fast Ethernet ports    
See also Gigabit Ethernet ports    
Ethernet over ATM encapsulation    
ATM-over-ADSL interfaces    
ATM-over-SHDSL interfaces    
Ethernet over ATM LLC encapsulation    
ATM-over-SHDSL interfaces    
Ethernet ports    See 10-Gigabit Ethernet ports    See Ethernet interfaces; Fast Ethernet ports; Gigabit Ethernet ports    
alarm condition indicator    
ETSI TS 101 388 V1.3.1 operating mode    
event options, configuration summary    
event viewer, J-Web    
overview    
See also system log messages    

F

fans    
speed, monitoring    
status, monitoring    
Fast Ethernet ports    
ARP address    
MAC address    
MTU    
Quick Configuration    
logical interfaces    
feature licenses    See license    
FEB redundancy    
monitoring    
file management    
configuration files    
crash files    
crash files (J-Web)    
log files    
log files (J-Web)    
temporary files    
temporary files (J-Web)    
filtering    
system log messages    
system log messages, regular expressions for    
firewall filters    
monitoring    
configuration summary    
flapping    
flow control    
10-Gigabit Ethernet    
forwarding classes    
adding and editing (Quick Configuration)    
assigning to logical interfaces (Quick Configuration)    
assigning to output queues (Quick Configuration)    
defining (Quick Configuration)    
summary (Quick Configuration)    
forwarding classes, CoS    
Forwarding Engine Board redundancy    
monitoring    
forwarding options, configuration summary    
FPC summary    See PIMs    
framing    
E1    
T1    
T3    
framing errors    

G

G.992.1 Deutsche Telekom UR-2 operating mode    
G.992.1 Non-UR-2 operating mode    
ge-0/0/0    
defining address (Quick Configuration)    
Gigabit Ethernet ports    
(copper) manual speed and link mode configuration    
ARP address    
logical interfaces    
MAC address    
MTU    
Quick Configuration    
source filtering, for MAC addresses    
autonegotiation    
group licenses    
groups    
BGP, displaying    

H

halting a Services Router    
with J-Web    
halting a Services Router immediately    
with J-Web    
hardware    
MAC address, displaying    
version, displaying    
heap space, for PIM (in FPC summary)    
heat status, checking    
history    See configuration history    
hostname    
defining (Quick Configuration)    
displaying (J-Web)    
for PPPoE CHAP (Quick Configuration)    
overriding for SNMP (Quick Configuration)    
pinging (J-Web)    
SNMP trap target (Quick Configuration)    
tracing a route to (J-Web)    
host reachability    
ping host (J-Web)    
HTTP (Hypertext Transfer Protocol)    
enabling Web access (Quick Configuration)    
HTTPS (Hypertext Transfer Protocol over SSL)    
enabling secure access (Quick Configuration)    
Quick Configuration    
Hypertext Transfer Protocol    See HTTP    
Hypertext Transfer Protocol over SSL    See HTTPS    

I

identifier link    
idle time, displaying    
initial configuration requirements    
installation    
software upgrades, from a remote server    
software upgrades, uploading    
licenses (J-Web)    
installing JUNOS software    
Install Remote page    
field summary    
Instance to which this connection belongs    
using    
interfaces    See management interfaces; network interfaces; ports    
configuration summary    
monitoring    
Quick Configuration    
Interfaces page    
for 10-Gigabit Ethernet    
for E1    
for E3    
for Fast Ethernet    
for serial interfaces    
for T1    
for T3 (DS3)    
invalid configuration, replacing    
inverting the transmit clock    
IPSec tunnels    
monitoring    
IPv4 addressing    
assigning for PPPoE (Quick Configuration)    
ISDN BRI Dialer Logical Interface page    
ISDN BRI interfaces    
calling number    
dial backup    See dial backup    
dialer watch    See dialer watch    
Q.931 timer    
Quick Configuration    
SPID    
static TEI    
switch types    
TEI option    
ISDN BRI Physical Interface page    
ISDN connections    
calling number    
dial backup    See dial backup    
dialer watch    See dialer watch    
Q.931 timer    
Quick Configuration (ISDN BRI)    
SPID    
static TEI    
switch types    
TEI option    
ITU Annex B non-UR-2 operating mode    
ITU Annex B UR-2 operating mode    
ITU DMT bis operating mode    
ITU DMT operating mode    
ITU G.992.1 operating mode    
ITU G.992.3 operating mode    
ITU G.992.5 operating mode    

J

J4350 routers    
manual copper Gigabit Ethernet speed and link mode configuration    
J6350 routers    
manual copper Gigabit Ethernet speed and link mode configuration    
J-flow traffic analysis, license    
jitter    
monitoring    
threshold, setting    
JTAC (Juniper Networks Technical Assistance Center)    
hardware information for    
JUNOS    
version, displaying    
JUNOS CLI    
command modes    
overview    
See also CLI terminal    
JUNOScript API    
defining access (Quick Configuration)    
enabling secure access    
JUNOScript over SSL    
JUNOS Enhanced Services software    
release notes, URL    
JUNOS software    
downgrading    
installing    
upgrading    
J-Web configuration editor    
committing a configuration    
configuration text, viewing    
editing a configuration    
J-Web interface    
comparing configuration differences    
configuration history    
See also configuration history    
event viewer    
managing files    
managing licenses    
regaining lost DHCP lease after initial configuration    
J-Web Quick Configuration    See Quick Configuration    

L

license    
add    
advanced BGP feature    
data link switching (DLSw)    
delete    
display keys    
J-flow traffic analysis    
manage    
license infringement    
identifying any licenses needed    
license infringement, alarm condition indicator    
license keys    
displaying (J-Web)    
status    
version    
licenses    
displaying (J-Web)    
group    
infringement, preventing    
See also license infringement    
managing (J-Web)    
adding (J-Web)    
deleting (J-Web)    
downloading (J-Web)    
limitations    
MPLS, no LSP statistics on outbound router    
software downgrade cannot be undone    
line buildout    
T1    
T3    
line speed    
ATM-over-SHDSL interfaces    
serial interfaces    
Link Services interface    
Quick Configuration    
link states    
network interfaces    
loading a configuration file    
downloading    
rollback    
uploading    
local password    
default authentication method for system    
method for user authentication (Quick Configuration)    
Locate LSP from interface name    
using    
Locate LSP from virtual circuit information    
using    
Locate LSP using interface name    
using    
Log Files page (Download)    
logical interfaces    
10-Gigabit Ethernet    
adding and editing CoS components (Quick Configuration)    
assigning CoS components to (Quick Configuration)    
ATM-over-ADSL (Quick Configuration)    
ATM-over-SHDSL (Quick Configuration)    
E1    
E3    
Fast Ethernet    
Gigabit Ethernet    
serial    
T1    
T3    
logical interfaces, CoS    
logical units    
10-Gigabit Ethernet interface    
ATM-over-ADSL interface (Quick Configuration)    
ATM-over-SHDSL interface (Quick Configuration)    
E1 interface    
E3 interface    
Fast Ethernet interface    
Gigabit Ethernet interface    
serial interface    
T1 interface    
T3 interface    
login classes    
specifying (Quick Configuration)    
login time, displaying    
long buildout    See line buildout    
loopback address    
defining (Quick Configuration)    
loopback address, displaying    
loopback testing, SHDSL    
loss priority, CoS    
LSPs (label-switched paths)    
information about    
statistics    

M

MAC (media access control) addresses    
configured, displaying    
learning, on 10-Gigabit Ethernet ports    
source filtering on 10-Gigabit Ethernet ports    
for static ARP on Fast Ethernet subnets    
See also static ARP entries    
for static ARP on Gigabit Ethernet subnets    
See also static ARP entries    
source filtering on Gigabit Ethernet ports    
hardware, displaying    
major (red) alarms    
action required    
management device    
diagnosing problems from    
monitoring from    
management interface address    
defining (Quick Configuration)    
management interface address, displaying    
management interfaces    
active alarms    
administrative states    
configuration, displaying    
monitoring    
managing    
reboots    
managing files    See file management    
manuals    
comments on    
mapping, CoS forwarding classes to schedulers    
maximum transmission unit    See MTU    
maximum transmission unit (MTU), displaying    
media access control    See MAC addresses    
memory usage    
general    
monitoring, PIM DRAM available    
monitoring, PIM heap and buffer space used    
minor (yellow) alarms    
action required    
MLFR bundle    
Quick Configuration    
MLPPP bundle    
Quick Configuration    
monitoring    
alarms    
BGP    
chassis    
chassis viewer    
class of service    
CLI commands and corresponding J-Web options    
DHCP    
FEB redundancy    
FEB redundancy, on M120    
firewall filters    
interfaces    
interfaces, sample    
IPSec    
J-Web tasks and corresponding CLI commands    
MPLS    
MPLS traffic engineering    
NAT    
OSPF    
overview    
See also diagnosis; statistics; status    
ports    
PPPoE    
RIP    
route information, sample    
routing    
routing information    
routing tables    
RPM    
RPM probes    
system    
system process information    
system properties    
monitor sample task    
MPLS, monitoring    
MPLS (Multiprotocol Label Switching)    
LSPs    
monitoring interfaces    
monitoring LSP information    
monitoring LSP statistics    
monitoring MPLS interfaces    
monitoring RSVP interfaces    
monitoring RSVP sessions    
monitoring traffic engineering    
MTU (maximum transmission unit)    
10-Gigabit Ethernet    
E1    
E3    
Fast Ethernet    
Gigabit Ethernet    
serial    
T1    
T3    
MTU (maximum transmission unit), displaying    
multilink bundles    
Quick Configuration options    
multiple routers, using snapshots to replicate configurations    
J-Web    
Multiprotocol Label Switching    See MPLS    

N

name of network interfaces, displaying    
NAT (Network Address Translation)    
monitoring    
Network Address Translation    See NAT    
network connectivity    
network interfaces    
10-Gigabit Ethernet configuration    
active alarms    
administrative states    
assigning CoS components to (Quick Configuration)    
DS3 configuration    
E1 configuration    
E3 configuration    
enabling RIP on    
Fast Ethernet configuration    
Gigabit Ethernet configuration    
monitoring    
monitoring, CoS    
monitoring, PPPoE    
Quick Configuration    
serial configuration    
T1 configuration    
T3 configuration    
configuration, displaying    
monitoring, RSVP    
monitoring MPLS traffic engineering    
next hop    
address for static routes    
next hop, displaying    
non-UR-2 operating mode    
NSSAs (not-so-stubby areas)    
area ID (Quick Configuration)    
area type (Quick Configuration)    
NTP server    
defining (Quick Configuration)    

O

OK button    
J-Web configuration editor    
Quick Configuration    
Open Shortest Path First    See OSPF    
openssl command    
option buttons    
Delete Configuration Below This Point    
Discard All Changes    
Discard Changes Below This Point    
OSPF (Open Shortest Path First)    
monitoring    
Quick Configuration    
statistics    
area type (Quick Configuration)    
enabling (Quick Configuration)    
designating OSPF interfaces (Quick Configuration)    
router ID (Quick Configuration)    
OSPF interfaces    
displaying    
enabling    
status    
OSPF neighbors    
displaying    
status    
OSPF page    
field summary    
OSPF routing information    

P

packet capture    
configuring (J-Web)    
J-Web tool    
overview (J-Web)    
Packet Capture page    
field summary    
results    
packet loss priority, CoS    
packets    
capturing with J-Web packet capture    
discarded    
dropped    
monitoring jitter    
monitoring packet loss    
monitoring round-trip times    
tracking MPLS    
tracking with J-Web traceroute    
packet capture (J-Web)    
partition, storage medium    
part numbers    
passwords    
local password method for user authentication (Quick Configuration)    
See also local password    
RADIUS secret    
TACACS+ secret    
physical interfaces    
adding and editing CoS components (Quick Configuration)    
assigning CoS components to (Quick Configuration)    
physical interfaces, CoS    
PIC    See PIMs    
PIMs (Physical Interface Modules)    
checking power and heat status    
DRAM available (in FPC summary)    
heap and buffer space used (in FPC summary)    
PIM number (always 0)    
temperature (in FPC summary)    
CPU usage (in FPC summary)    
slot status (in FPC summary)    
slot number (in FPC summary)    
ping    
ATM    
ATM node reachability (J-Web)    
host    
host reachability (J-Web)    
indications    
MPLS    
ping ATM    
results    
Ping ATM page    
results    
Ping end point of LSP    
using    
ping host    
results    
sample    
Ping Host page    
field summary    
results    
Ping LDP-signaled LSP    
using    
Ping LSP to Layer 3 VPN prefix    
using    
ping MPLS    
layer-2 VPN, instance    
layer-2 VPN, interface    
LDP-signaled LSP    
LSP endpoint    
LSP to Layer 3 VPN prefix    
RSVP-signaled LSP    
ping MPLS (J-Web)    
indications    
results    
ping mpls l2circuit command    
results    
ping mpls l2vpn command    
results    
ping mpls l3vpn command    
results    
ping mpls ldp command    
results    
ping mpls lsp-end-point command    
results    
Ping MPLS page    
field summary    
results    
ping mpls rsvp command    
results    
Ping RSVP-signaled LSP    
using    
Point-to-Point Protocol over Ethernet    See PPPoE    
policy options, configuration summary    
ports    
10-Gigabit Ethernet    See 10-Gigabit Ethernet ports    
configuration, displaying    
DS1    See E1 ports; T1 ports    
DS3    See E3 ports; T3 ports    
E1    See E1 ports    
E3    See E3 ports    
Fast Ethernet    See Fast Ethernet ports    
Gigabit Ethernet    See Gigabit Ethernet ports    
monitoring    
serial    See serial ports    
T1    See T1 ports    
T3    See T3 ports    
power management, chassis    
pp0    
logical Ethernet interface on (Quick Configuration)    
PPPoA (Point-to-Point Protocol over ATM)    
physical encapsulation (ATM-over-SHDSL)    
PPPoE, monitoring    
PPPoE (Point-to-Point Protocol over Ethernet)    
CHAP local identity (Quick Configuration)    
interfaces (Quick Configuration)    
monitoring    
CHAP (Quick Configuration)    
version information    
address assignment (Quick Configuration)    
interfaces    
logical interfaces (Quick Configuration)    
session status    
statistics    
service type (Quick Configuration)    
session limit (Quick Configuration)    
session reconnection time (Quick Configuration)    
underlying interface (Quick Configuration)    
PPPoE interfaces    See PPPoE    
PPPoE Interfaces Quick Configuration page    
PPPoE over ATM LLC encapsulation    
ATM-over-ADSL interfaces    
ATM-over-SHDSL interfaces    
PPP over ATM-over-SHDSL    See PPPoA    
probe loss    
monitoring    
threshold, setting    
probes, monitoring    
See also RPM probes    
process command, displaying    
process ID, displaying    
process information, system, monitoring    
process owner, displaying    
process sleep state, displaying    
process start time, displaying    
process status, displaying    
process terminal, displaying    
properties, system, monitoring    
protocols    
originating, displaying    
OSPF, monitoring    
RIP, monitoring    
routing protocols, monitoring    
publishing responses to ARP requests    
on Fast Ethernet subnets (Quick Configuration)    
on Gigabit Ethernet subnets (Quick Configuration)    

Q

Q.931 timer, ISDN    
Quick Configuration    
10-Gigabit Ethernet Interfaces page    
Add a RADIUS Server page    
Add a TACACS+ Server page    
Add a User page    
adding users    
ATM-over-ADSL Interfaces page    
ATM-over-SHDSL Interfaces page    
authentication method    
basic settings    
BGP page    
buttons    
Class of Service initial page    
Class of Service Interfaces page    
CoS classifiers page    
CoS forwarding classes page    
CoS scheduler maps page    
CoS schedulers page    
CoS value aliases page    
E1 Interfaces page    
E3 Interfaces page    
Fast Ethernet Interfaces page    
initial configuration    
ISDN BRI Dialer Logical Interface page    
ISDN BRI Physical Interface page    
network interfaces    
OSPF page    
overview    
Packet Capture page    
Packet Capture results page    
PPPoE Interfaces page    
RADIUS server    
rewrite rules page    
RIP page    
RPM pages    
Secure Access page    
secure Web access    
serial Interfaces page    
Set Up page    
SNMP page    
Static Routes page    
T1 Interfaces page    
T3 (DS3) Interfaces page    
TACACS+ server    
user management    
Users page    
View Events page    
virtual channel groups page    
CoS RED drop profiles page    

R

radio buttons    See option buttons    
RADIUS    
adding a server (Quick Configuration)    
secret (Quick Configuration)    
specifying for authentication (Quick Configuration)    
random early detection (RED) drop profiles, CoS    
real-time performance monitoring    See RPM    
reboot immediately    
with J-Web    
rebooting    
with J-Web    
RED (random early detection) drop profiles    
adding and editing (Quick Configuration)    
summary (Quick Configuration)    
defining (Quick Configuration)    
red Alarms indicator, in J-Web    
RED drop profiles, CoS    
Refresh button    
regular expressions for filtering system logs    
release notes, URL    
remote server, upgrading from    
rescue configuration    
deleting    
setting    
viewing    
Resource Reservation Protocol    See RSVP    
reverting to a previous configuration file (J-Web)    
rewrite rules    
assigning to logical interfaces (Quick Configuration)    
defining (Quick Configuration)    
summary (Quick Configuration)    
adding and editing (Quick Configuration)    
rewrite rules, CoS    
RIP (Routing Information Protocol)    
monitoring    
Quick Configuration    
enabling (Quick Configuration)    
statistics    
designating RIP interfaces    
RIP neighbors    
displaying    
status    
RIP page    
field summary    
RIP routing information    
rolling back a configuration file during configuration    
root password    
defining (Quick Configuration)    
rotating files    
round-trip time    
threshold, setting    
route information sample task    
routing    
monitoring    
traceroute (J-Web)    
routing, monitoring    
Routing Engine    
temperature    
routing instances, configuration summary    
routing options, configuration summary    
routing policies    
export, displaying    
import, displaying    
routing protocols    
configuration summary    
routing table    
displaying    
monitoring    
RPM (real-time performance monitoring)    
graph results    
monitoring    
monitoring probes    
Quick Configuration    
RPM probes    
sample graphs    
tests, viewing    
jitter, viewing    
round-trip times, viewing    
RPM pages    
field summary    
RPM probes    
cumulative jitter    
current tests    
DSCP bits (Quick Configuration)    
graph results    
jitter threshold    
monitoring    
probe count, setting (Quick Configuration)    
probe intervals, setting (Quick Configuration)    
probe loss count    
probe owner    
probe type, setting (Quick Configuration)    
round-trip times, viewing    
round-trip time threshold    
SNMP traps (Quick Configuration)    
TCP server port    
test intervals, setting (Quick Configuration)    
test target    
threshold values, setting (Quick Configuration)    
UDP server port    
RSVP (Resource Reservation Protocol)    
interfaces, monitoring    
sessions, monitoring    

S

samples    
RPM test graphs    
sample tasks    
configuring accounting options    
managing snapshots    
monitoring interfaces    
monitoring route information    
ping host    
scheduler maps    
assigning to logical interfaces (Quick Configuration)    
assigning to physical interfaces (Quick Configuration)    
defining (Quick Configuration)    
summary (Quick Configuration)    
adding and editing (Quick Configuration)    
scheduler maps, CoS    
schedulers    
adding and editing (Quick Configuration)    
defining (Quick Configuration)    
mapping to forwarding classes (Quick Configuration)    
scheduler maps    See scheduler maps    
summary (Quick Configuration)    
scheduling a reboot    
with J-Web    
secret    
RADIUS (Quick Configuration)    
TACACS+ (Quick Configuration)    
secret, CHAP    See CHAP, local identity    
secure access    
generating SSL certificates    
HTTPS access (Quick Configuration)    
installing SSL certificates (Quick Configuration)    
JUNOScript SSL access    
Secure Access page    
description    
field summary    
Security    
Quick Configuration    
security, configuration summary    
Security Policy pages    
field summary    
self-near-end crosstalk    See SNEXT    
serial interfaces    
Quick Configuration    
serial number    
chassis components    
Services Router    
serial ports    
alarm condition indicator    
clocking    
clocking, inverting the transmit clock    
clock rate    
encapsulation type    
line speed    
logical interfaces    
MTU    
Quick Configuration    
CHAP    
service provider ID    See SPID    
services, configuration summary    
services module    
alarm condition indicator    
Services Router    
halting (J-Web)    
rebooting (J-Web)    
serial number, displaying    
sessions    
BGP peer, status details    
BGP peer, status summary    
PPPoE, reconnection time (Quick Configuration)    
RSVP, monitoring    
setup    
Quick Configuration    
requirements    
Set Up page    
description    
field summary    
prerequisites    
severity levels    
for alarms    See alarm severity    
SHDSL interfaces    See ATM-over-SHDSL interfaces    
SHDSL page    
show bgp neighbor command    
show bgp summary command    
show chassis alarms command    
show chassis environment command    
show chassis fpc command    
show chassis hardware command    
show chassis power-ratings command    
show class-of-service classifier command    
show class-of-service code-point-aliases command    
show class-of-service command    
show class-of-service drop-profile command    
show class-of-service forwarding-class command    
show class-of-service rewrite-rules command    
show class-of-service scheduler-map command    
show interfaces detail command    
show interfaces interface-name command    
show interfaces pp0 command    
show interfaces terse command    
show mpls interface command    
show mpls lsp command    
show mpls statistics command    
show ospf interfaces command    
show ospf neighbors command    
show ospf statistics command    
show pppoe interfaces command    
show pppoe statistics command    
show pppoe version command    
show rip neighbors command    
show rip statistics command    
show route detail command    
show route terse command    
show services rpm probe-results command    
show system alarms command    
show system processes command    
show system storage command    
show system uptime command    
show system users command    
signal-to-noise ratio    See SNR    
slots, PIM, monitoring (in FPC summary)    
snapshot    
sample task    
system software    
Snapshot page    
snapshots    
to replace primary compact flash, for multiple routers (J-Web)    
SNEXT (self-near-end crosstalk) threshold, SHDSL    
SNMP    
configuration summary    
SNMP (Simple Network Management Protocol)    
Quick Configuration    
SNMP communities    
Quick Configuration    
SNMP health monitor    
Quick Configuration    
SNMP page    
SNMP traps    
Quick Configuration    
SNR (signal-to-noise ratio) margin, SHDSL    
software    
halting immediately (J-Web)    
version, displaying    
software, halting immediately    
software package    
downgrading    
installing    
upgrading    
source filtering, 10-Gigabit Ethernet    
for MAC addresses    
source filtering, Gigabit Ethernet    
for MAC addresses    
speed, fans, monitoring    
SPID (service provider ID), ISDN    
SSH    
defining access (Quick Configuration)    
SSL (Secure Sockets Layer)    
enabling secure access (Quick Configuration)    
SSL certificates    
adding (Quick Configuration)    
generating    
static ARP entries    
Fast Ethernet interface    
Gigabit Ethernet interface    
static routes    
Quick Configuration    
Static Routes page    
field summary    
static routing    
default gateway    
static TEI (terminal endpoint identifier), ISDN    
statistics    
BGP    
LSP    
OSPF    
PPPoE    
RIP    
RPM, monitoring    
status    
administrative link state    
BGP    
fans    
license key    
link states, network interfaces    
OSPF interfaces    
OSPF neighbors    
RIP neighbors    
slot (in FPC summary)    
stub areas    
area ID (Quick Configuration)    
area type (Quick Configuration)    
subnetworks    
IPv4 subnet addresses for multiple ISDN dialer interfaces    
Summary Quick Configuration page    
support, technical    See technical support    
switch types, supported, ISDN    
for ISDN BRI service    
system    
configuration summary    
monitoring    
system identification, displaying    
system log messages    
displaying at a terminal (configuration editor)    
event viewer    
filtering (Quick Configuration)    
monitoring (Quick Configuration)    
regular expressions for filtering    
viewing (Quick Configuration)    
system logs    
displaying size    
file cleanup    
file cleanup (J-Web)    
regular expressions for filtering    
system management    
files    
licenses    
Quick Configuration    
reboots    
software    
system process information, displaying    
system storage, displaying    
system time    
defining (Quick Configuration)    
synchronizing (Quick Configuration)    
system time, displaying    

T

T1 interfaces    
Quick Configuration    
T1 ports    
cable length    
CHAP    
clocking    
data inversion    
encapsulation type    
frame checksum    
framing    
logical interfaces    
MTU    
Quick Configuration    
time slots    
T3 interfaces    
Quick Configuration    
T3 ports    
alarm condition indicator    
cable length    
C-bit parity    
CHAP    
clocking    
encapsulation type    
frame checksum    
framing    
logical interfaces    
MTU    
Quick Configuration    
TACACS+    
adding a server (Quick Configuration)    
specifying for authentication (Quick Configuration)    
secret (Quick Configuration)    
tag protocol IDs (TPIDs), 10-Gigabit Ethernet    
TCP RPM probes    
server port    
technical support    
contacting JTAC    
hardware information for    
TEI option, ISDN    
Telnet    
defining access (Quick Configuration)    
temperature    
chassis, monitoring    
PIM (in FPC summary)    
temporary files    
cleaning up (J-Web)    
displaying size    
downloading (J-Web)    
temporary files, cleaning up    
time slots    
E1    
T1    
timestamps    
suppressing in packet headers, in captured packets    
time to live    See TTL    
time zone    
defining (Quick Configuration)    
time zone, displaying    
TPIDs, 10-Gigabit Ethernet    
traceroute    
indications    
J-Web tool    
results    
TTL increments    
traceroute, overview    
Traceroute page    
field summary    
traffic    
tracking with J-Web traceroute    
transmission speed, displaying    
transmit clock source    See clocking    
troubleshooting    
dialer interfaces, packet loss due to duplicate IP subnet addresses    
TTL (time to live)    
increments, in traceroute packets    
in ping requests    
TTL (time to live), ping requests    
TTY, displaying    

U

UDP RPM probes    
server port    
upgrades    
installing by uploading    
installing from remote server    
upgrading JUNOS software    
uploading a configuration file    
Upload package page    
field summary    
UR-2 operating mode    
URLs    
release notes    
username    
displaying    
specifying (Quick Configuration)    
users    
adding (Quick Configuration)    
displaying    
Users Quick Configuration page    

V

VCI (virtual channel identifier)    
ATM-over-ADSL interfaces    
ATM-over-SHDSL interfaces    
verification    
ATM node reachability (J-Web)    
destination path (J-Web)    
host reachability (J-Web)    
version    
hardware, displaying    
PPPoE, information about    
software, displaying    
version, license key    
view and edit    
committing a text file, with caution    
configuration, editing    
configuration text, viewing    
uploading a file    
View Events page    
field summary (filtering log messages)    
field summary (viewing log messages)    
viewing configuration text    
virtual channel groups    
adding and editing (Quick Configuration)    
summary (Quick Configuration)    
assigning to logical interfaces (Quick Configuration)    
virtual channels    
defining groups (Quick Configuration)    
groups    See virtual channel groups    
adding and editing (Quick Configuration)    
VLAN tagging    See 10-Gigabit Ethernet ports, TPIDs    
VPI (virtual path identifier)    
ATM-over-ADSL interfaces    
ATM-over-SHDSL interfaces    

W

watch list, for ISDN backup    
Web access, secure    See secure access    

X

x and y coordinates, CoS drop profiles    

[Prev][Next][Report an Error]