[Prev][Next][Report an Error]

Monitoring Flow Information for All Sessions

To view information about all currently active security sessions on the router, select Monitor>Firewall/NAT>Flow Session Statistics in the J-Web interface. Then select all from the Session Filter list and click Show. To view information about the incoming and outgoing source and destination addresses and the protocol and interface for a specific session, select the session ID on the Flow Session Statistics page.

Alternatively, enter the following CLI command:

Table 51 summarizes key output fields in the flow all session display.

Table 51: Summary of Key Flow All Session Information Output Fields

Field

Values

Additional Information

Flow Session Statistics: session filter—all

Session ID

Number that identifies the session. Use this ID to get more information about the session.

 

Policy name

Policy that permitted the traffic.

 

Timeout

Idle timeout after which the session expires.

 
Flow Session Statistics: Session ID

In

Incoming flow (source and destination IP addresses, application protocol, and interface).

 

Out

Reverse flow (source and destination IP addresses, application protocol, and interface).

 

[Prev][Next][Report an Error]