[Prev][Next][Report an Error]

Installing Software Upgrades from a Remote Server

You can use the J-Web interface to install software packages on the Services Router that are retrieved with FTP or HTTP from the location specified.

Note: This procedure applies only to upgrading one release of JUNOS software with enhanced services to another. To upgrade from the JUNOS software to JUNOS software with enhanced services, see the JUNOS Software with Enhanced Services Migration Guide.

To install software upgrades from a remote server:

  1. Before installing the software upgrade, verify the available space on the compact flash. For information about verifying available compact flash space, see the JUNOS Software with Enhanced Services Release Notes.
  2. Download the software package as described in the JUNOS Enhanced Services Administration Guide.
  3. In the J-Web interface, select Manage>Software>Install Package.
  4. On the Install Remote page, enter the required information into the fields described in Table 161.
  5. Click Fetch and Install Package. The software is activated after the router reboots.

Table 161: Install Remote Summary



Your Action

Package Location (required)

Specifies the FTP or HTTP server, file path, and software package name.

Type the full address of the software package location on the FTP or HTTP server—one of the following:



Specifies the username, if the server requires one.

Type the username.


Specifies the password, if the server requires one.

Type the password.

Reboot If Required

If this box is checked, the Services Router is automatically rebooted when the upgrade is complete.

Check the box if you want the Services Router to reboot automatically when the upgrade is complete.

[Prev][Next][Report an Error]