[Prev][Next][Report an Error]

Using Reboot

The Manage>Reboot page allows you to reboot the Services Router at a specified time. Using the Manage>Reboot page, you can perform the following tasks:

Click Schedule to begin.

If the reboot is scheduled to occur immediately, the Services Router reboots. You cannot access the J-Web interface until the Services Router has restarted and the boot sequence is complete. After the reboot is complete, refresh the browser window to display the J-Web interface login page.

Alternatively, you can reboot the routing platform by running the request system reboot command at the J-Web CLI terminal. For more information, see Using the CLI Terminal. For more information about the request system reboot command, see the JUNOS System Basics and Services Command Reference.

[Prev][Next][Report an Error]