[Prev][Next][Report an Error]
Defining CoS Components
Using the Class of Service Quick Configuration pages, you can
configure various CoS components individually or in combination to
define particular CoS services. For a description of different CoS
components, see the JUNOS Enhanced Services Interfaces and Routing Configuration Guide.
Figure 34 shows the initial
Quick Configuration page for CoS that displays the CoS components.
Figure 34: Initial Class of Service
Quick Configuration Page

To configure CoS components with Quick Configuration:
- In the J-Web interface, select Configuration>Quick
Configuration>Class of Service.
- On the Class of Service Quick Configuration page,
select one of the following options depending on the CoS component
that you want to define. Enter information into the pages as described
in the respective table:
- Click one of the following buttons after
completing configuration on any Quick Configuration page:
- To apply the configuration and stay in the current Quick
Configuration page, click Apply.
- To apply the configuration and return to the previous
Quick Configuration page, click OK.
- To cancel your entries and return to the previous Quick
Configuration page, click Cancel.
- Go on to one of the following procedures:
- To assign CoS components to interfaces, see Assigning CoS Components to Interfaces.
- To verify the CoS configuration, see the JUNOS Enhanced Services Interfaces and Routing Configuration Guide.
[Prev][Next][Report an Error]
help_page