[Prev][Next][Report an Error]

Configuring System Authentication

On the Users Quick Configuration page, you can configure the authentication methods the Services Router uses to verify that a user can gain access. For each login attempt, the Services Router tries the authentication methods in order, starting with the first one, until the password matches.

If you do not configure system authentication, users are verified based on their configured local passwords.

Figure 27 shows the Users Quick Configuration page.

Figure 27: Users Quick Configuration Page

Users Quick Configuration Page

To configure system authentication with Quick Configuration:

  1. In the J-Web interface, select Configuration>Quick Configuration>Users.
  2. Under Authentication Servers, select the check box next to each authentication method the Services Router must use when users log in:
  3. Click one of the following buttons on the Users Quick Configuration page:

[Prev][Next][Report an Error]