[Report an Error]

Configuring Scheduler—Quick Configuration

You can use J-Web Quick Configuration to quickly configure a schedule for the security policies. See the figure below.

Before You Begin
  1. Establish basic connectivity. (See the Getting Started Guide for your router.)
  2. Configure security zones and interfaces. For more information, see Configuring Security Zones—Quick Configuration
  3. Configure address books. For more information, see Configuring Addresses and Address Sets—Quick Configuration
  4. Configure security policies that are going to be associated with a schedule. See Configuring Security—Quick Configuration

Figure 50: Quick Configuration Policies Page for Schedulers

Quick Configuration Policies
Page for Schedulers

To configure a scheduler with Quick Configuration:

  1. Select Configuration > Quick Configuration > Schedulers.
  2. Click Add.
  3. Specify a scheduler name.
  4. Specify the start and stop date and times in the YYYY.MM.DD.hh.mm (year, month, date, hour, minutes) format.
  5. Select the recurrent period, if needed. Click the plus sign by a specific day to select all day or exclude a day from the weekly schedule.
  6. Click one of the following buttons:


[Report an Error]