[Prev][Next][Report an Error]

Configuring Source NAT—Quick Configuration

You can use J-Web Quick Configuration to quickly configure source NAT.

To configure source NAT with Quick Configuration:

  1. Select Configuration > Quick Configuration > Firewall/NAT > Source NAT. See the figure below.

    Figure 67: Quick Configuration Page for Source NAT

    Quick Configuration Page for Source NAT

  2. Fill in the options as shown in the table below.
  3. Click one of the following buttons:

Table 130: Source NAT Configuration Options

Field

Function

Action

Source NAT

Address Persistent

Ensures that the router assigns the same IP address from a source pool to a host for multiple concurrent sessions.

Enable Address Persistent.

Pool Utilization Alarm

Turns on pool utilization alarm by configuring alarm thresholds.

Raise Threshold—Enter a number between 50-100 to raise the threshold for the pool utilization alarm.

Clear Threshold—Enter a number between 40-100 to clear the threshold for the pool utilization alarm.

Pool Set

Add Pool Sets

Defines one or more source pool sets (group of source pools).

Click Add.

Pool Set Name

Descriptive name for the pool set.

Type a name for the pool set.

Pool

Name of the pools to be included in the address pool set.

Select the pools to be added and click Add.


[Prev][Next][Report an Error]