[Prev][Next][Report an Error]

Monitoring Stateful Firewall Filters

To view stateful firewall filter information in the J-Web interface, select Monitor>Firewall>Stateful Firewall. To display stateful firewall filter information for a particular address prefix, port, or other characteristic, type or select information in one or more of the Narrow Search boxes, and click OK.

Alternatively, enter the following CLI show commands:

Table 28 summarizes key output fields for stateful firewall filters.

Table 28: Summary of Key Stateful Firewall Filters Output Fields

Field

Values

Protocol

Protocol used for the specified stateful firewall flow.

Source IP

Source prefix of the stateful firewall flow.

Source Port

Source port number of stateful firewall flow.

Destination IP

Destination prefix of the stateful firewall flow.

Destination Port

Destination port number of the stateful firewall flow.

Flow State

Status of the stateful firewall flow:

  • Drop—Drop all packets in the flow without response.
  • Forward—Forward the packet in the flow without inspecting it.
  • Reject—Drop all packets in the flow with response.
  • Watch—Inspect packets in the flow.

Direction

Direction of the flow: I (input) or O (output).

Frames

Number of frames in the flow.

For more information about the J-Web Monitor task, see Monitor Tasks.


[Prev][Next][Report an Error]