[Prev][Next][Report an Error]

Installing Software Upgrades by Uploading Files

You can use the J-Web interface to install software packages uploaded from your computer to the Services Router. Before installing the software upgrade, you need to verify that there is enough available space on the compact flash.

Note: This procedure applies only to upgrading one release of the JUNOS Enhanced Services software to another. To upgrade from the JUNOS software to the JUNOS Enhanced Services software, see the JUNOS Enhanced Services Migration Guide.

Figure 104 shows the Upload Package page for the Services Router.

Figure 104: Upload Package Page

Upload Package Page

To install software upgrades by uploading files:

  1. Before installing the software upgrade, verify the available space on the compact flash. For information about verifying available compact flash space, see the JUNOS Enhanced Services Release Notes.
  2. Download the software package as described in the JUNOS Enhanced Services Administration Guide.
  3. In the J-Web interface, select Manage>Software>Upload Package.
  4. On the Upload Package page, enter information into the fields described in Table 145.
  5. Click Upload Package. The software is activated after the Services Router has rebooted.

Table 145: Upload Package Summary

Field

Function

Your Action

File to Upload (required)

Specifies the location of the software package on the local system.

Type the location of the software package, or click Browse to navigate to the location.

Reboot If Required

If this box is checked the Services Router is automatically rebooted when the upgrade is complete.

Select the check box if you want the Services Router to reboot automatically when the upgrade is complete.


[Prev][Next][Report an Error]