[Prev][Next][Report an Error]

Defining CoS Components

Using the Class of Service Quick Configuration pages, you can configure various CoS components individually or in combination to define particular CoS services. For a description of different CoS components, see the JUNOS Enhanced Services Interfaces and Routing Configuration Guide.

Figure 34 shows the initial Quick Configuration page for CoS that displays the CoS components.

Figure 34: Initial Class of Service Quick Configuration Page

Initial Class of Service
Quick Configuration Page

To configure CoS components with Quick Configuration:

  1. In the J-Web interface, select Configuration>Quick Configuration>Class of Service.
  2. On the Class of Service Quick Configuration page, select one of the following options depending on the CoS component that you want to define. Enter information into the pages as described in the respective table:
  3. Click one of the following buttons after completing configuration on any Quick Configuration page:
  4. Go on to one of the following procedures:

[Prev][Next][Report an Error]