[Prev][Next][Report an Error]

Configuring BGP Sessions with Quick Configuration

J-Web Quick Configuration allows you to create BGP peering sessions. Figure 33 shows the Quick Configuration Routing page for BGP.

Figure 33: Quick Configuration Routing Page for BGP

Quick Configuration Routing
Page for BGP

To configure a BGP peering session with Quick Configuration:

  1. In the J-Web user interface, select Configuration>Quick Configuration>Routing and Protocols.
  2. Enter information into the Quick Configuration page for BGP, as described in Table 98.
  3. From the main BGP routing Quick Configuration page, click one of the following buttons:
  4. To check the configuration, see the JUNOS Enhanced Services Interfaces and Routing Configuration Guide.

Table 98: BGP Routing Quick Configuration Summary

Field

Function

Your Action

Router Identification  

Router Identifier (required)

Uniquely identifies the router

Type the Services Router's 32-bit IP address, in dotted decimal notation.

BGP  

Enable BGP

Enables or disables BGP.

  • To enable BGP, select the check box.
  • To disable BGP, clear the check box.

Autonomous System Number

Sets the unique numeric identifier of the AS in which the Services Router is configured.

Type the Services Router's 32-bit AS number, in dotted decimal notation.

If you enter an integer, the value is converted to a 32-bit equivalent. For example, if you enter 3, the value assigned to the AS is 0.0.0.3.

Peer Autonomous System Number

Sets the unique numeric identifier of the AS in which the peer host resides.

Type the peer host's 32-bit AS number, in dotted decimal notation.

If you enter an integer, the value is converted to a 32-bit equivalent. For example, if you enter 3, the value assigned to the AS is 0.0.0.3.

Peer Address

Specifies the IP address of the peer host's interface to which the BGP session is being established.

Type the IP address of the peer host's adjacent interface, in dotted decimal notation.

Local Address

Specifies the IP address of the local host's interface from which the BGP session is being established.

Type the IP address of the local host's adjacent interface, in dotted decimal notation.


[Prev][Next][Report an Error]