[Next][Report an Error]

Configuring Interfaces—Quick Configuration

You can use J-Web Quick Configuration to quickly configure interfaces.

Figure 10: Quick Configuration Interfaces Page

Quick Configuration Interfaces Page

To configure a network interface with Quick Configuration:

  1. Select Configuration>Quick Configuration>Interfaces. For information about interface names, see the JUNOS Enhanced Services Interfaces and Routing Configuration Guide.

    A list of the network interfaces available on the routing platform appears, as shown in the figure above. The third column indicates whether the interface has been configured.

  2. Configure properties for a network interface by selecting the interface name and following the instructions in the sections listed below.

[Next][Report an Error]