Monitoring RIP Routing Information
Purpose
View RIP routing information, including a summary of RIP neighbors and statistics.
Action
Select Monitor>Routing>RIP Information in the J-Web user interface, or enter the following CLI commands:
- show rip statistics
- show rip neighbors
Table 77 summarizes key output fields in the RIP routing display in the J-Web user interface.
Table 77: Summary of Key RIP Routing Output Fields
Field | Values | Additional Information |
|---|---|---|
| RIP Statistics | ||
Protocol Name | The RIP protocol name. | – |
Port number | The port on which RIP is enabled. | – |
Hold down time | The interval during which routes are neither advertised nor updated. | – |
Global routes learned | Number of RIP routes learned on the logical interface. | – |
Global routes held down | Number of RIP routes that are not advertised or updated during the hold-down interval. | – |
Global request dropped | Number of requests dropped. | – |
Global responses dropped | Number of responses dropped. | – |
| RIP Neighbors | ||
Details | Tab used to view the details of the interface on which RIP is enabled. | – |
Neighbor | Name of the RIP neighbor. | This value is the name of the interface on which RIP is enabled. Click the name to see the details for this neighbor. |
State | State of the RIP connection: Up or Dn (Down). | – |
Source Address | Local source address. | This value is the configured address of the interface on which RIP is enabled. |
Destination Address | Destination address. | This value is the configured address of the immediate RIP adjacency. |
Send Mode | The mode of sending RIP messages. | – |
Receive Mode | The mode in which messages are received. | – |
In Metric | Value of the incoming metric configured for the RIP neighbor. | – |