Monitoring IPSec VPN Events
Purpose
Use this page to view information about security events based on IPSec VPN policies. This page provides a view of all IPsec VPN events.
Action
To monitor events select Monitor>Events>IPSec VPNs in the J-Web user interface.
Meaning
Time Range graph displays the trend of all events or flow for all the events that has transpired in the device.
You can specify the duration of time for which you want to view the trend for all events. The available options are 30m, 1h, 4h,…, and so on, which are displayed at the top right hand side of the page. For example, if you choose 30m, the end time is the current system time and the start time is the preceding 30 minutes from the current system time.
Click Custom to specify a customized time range. The Custom Time Range Selection popup window is presented. You can set the from and to date and time, and click OK to set the time range.
To refresh the graph on demand, click the refresh button.
You can also drag the slider in the Time Range graph from the extreme left or right of the graph and set the time range to see the trend or flow of events that has transpired in that time range.
There are two ways to view your data. You can select either the Summary View tab or the Detailed View tab.
The Summary View is selected by default, and it gives a brief summary of all the IPSec VPN events in your network.
The data presented in the line graph (also known as swim lanes) is refreshed automatically based on the selected time range. The line graph shows light blue lanes that represent all IPSec VPN events and dark blue lanes represent blocked IPSec VPN events.
Click the Detailed View for comprehensive details of events in a grid format that includes sortable columns. It displays information in grids that are lazy loaded with infinite scrolling. You can narrow down your search to a particular event based on IP address, description, or attack name. The table includes information such as the rule that caused the event, severity for the event, event ID, traffic information, and how and when the event was detected.
Table 18: Filter Options in Detailed View
The dropdown filter that is displayed above the grids. | Options available in the filter dropdown is: Event-Name. | Select Event-Name. |
Text box | Displays the filter parameter that you selected from the filter dropdown. Note: In the filter statement the following limitation exists.
For example, if you have used & operator and the parameter Event-Name once, I cannot use them again in the same filter statement CORRECT USAGE: Event-Name = rt_flow_session_close & application=TELNET WRONG USAGE:Event-Name = rt_flow_session_close & Event-Name = rt_flow_session_create WRONG USAGE:Event-Name = rt_flow_session_close & source-address = x.x.x.x & application = TELNET Note: The filter statement is NOT case-sensitive. | Add the parameter for which you want to filter. For example, in the dropdown filter if you selected event-name as the parameter, the text box displays Event-Name =. If you add RT_IPSEC_BAD_SPI_RT_IPSEC_RELAY, RT_IPSEC_PV_RELAY to see only IPSec VPN events then the text box displays Event-Name = RT_IPSEC_BAD_SPI_RT_IPSEC_RELAY, RT_IPSEC_PV_RELAY. |
Go | Executes the filter statement that is displayed in the text box. | Click Go. |
X | Clears the filters. | Click x. |
The Table 19 describes the grid information displayed in the Detailed View.
Table 19: IPSec VPN Events - Grid Elements in Detailed View
Grid Element | Description |
---|---|
Event Name | The event name of the log. |
Description | The description of the log. |
Destination Port | The destination port of the event. |
Hostname | The host name in the log. |
Rule Name | The rule name of the log. |
Time | The time when the log was received. |