Static NAT Configuration Page Options

  1. Select Configure >NAT>Static NAT in the J-Web user interface if you are using SRX5400, SRX5600, or SRX5800 platforms.

    Or

    Select Configure>Security>NAT>Static in the J-Web user interface.

    The Static NAT configuration page appears. Table 195 explains the contents of this page.

  2. Click one:
    • Add or +—Adds a new or duplicate static NAT configuration. Enter information as specified in Table 196.
    • Edit or /—Edits the selected static NAT configuration.
    • Delete or X—Deletes the selected static NAT configuration.
  3. Click one:
    • OK—Saves the configuration and returns to the main configuration page.
    • Cancel—Cancels your entries and returns to the main configuration page.

Table 195: Static NAT Configuration Page

Field

Function

Static NAT Rule Set

From

Displays the destination NAT sort options from which the packets flow.

The options available are:

  • Routing Instance
  • Zone
  • Interface

Filter

Displays the filter option.

Name

Displays the name of the static NAT rule set.

From

Displays the name of the routing instance/zone/interface from which the packets flow.

Rule

Displays the name of the rule in the selected static NAT rule set.

Description

Displays a description of the static NAT rule set.

Rules in Selected Rule-Set

Rule Name

Displays the name of the routing instance/zone/interface to which the packet flows.

Match Destination

Displays the match destination address.

Action

Displays the action of the rule in the selected rule set.

Description

Displays a description of the rule in the selected static NAT rule set.

Table 196: Add Static NAT Configuration Details

Field FunctionAction
Add Rule Set

Rule Set Name

Specifies the name of the rule set.

Enter the rule set name.

Rule Set Description

Specifies a description for the rule set.

Enter a description for the rule set.

From

Specifies the filter options. The options available are:

  • Routing Instance
  • Zone
  • Interface

Select an option.

Select the routing instances/zones/interfaces in the Available column and the use the right arrow to move them to the Selected column.

Add Rule

Rule Name

Specifies the name of the rule.

Enter the rule name.

Rule Description

Specifies a description for the rule.

Enter a description for the rule.

Match Destination Address

IPv4

Specifies the IPv4 address.

Enter the IPv4 address.

IPv6

Specifies the IPv6 address.

Enter the IPv6 address.

Then

Static Prefix

Specifies the static prefix.

Enter the static prefix address.

Routing Instance

Specifies the routing instance.

Select a routing instance.

Related Documentation