Application Tracking Configuration Page Options

Select Configure>Security>AppSecure>App Tracking in the J-Web user interface.
The Application Tracking configuration page appears. Table 96 explains the contents of this page.
Click Apply to apply the settings to the configuration.

Table 96: Application Tracking Configuration Page

Field	Function	Action
Application Tracking

Enable Application tracking

Enables or disables application tracking. You can set the following:

Log as session(s) created—Generates a log message when a session is created. By default, this option is disabled.
Delay logging first session(s)—Enables you to specify the length of time that must pass before the first log message is created. The default is 1 minute.
Frequency of session updates—Enables you to set the interval at which update messages are sent. The default is 5 minutes.

Select the Enable Application Tracking check box to enable application tracking. Clear the check box to disable application tracking.

Enable Application tracking by Zone
Available Zones	Lists the available zones.	To enable application tracking, select the zone and click the right arrow to move it to the tracking enabled list.
Tracking Enabled	Lists the zones to be tracked.	To disable application tracking, select the zone and then click the left arrow to move the zone back into the available list.