Global Address Book Configuration Page Options
- Select Configure>Security>Policy Elements > Global
Address Book in the J-Web user interface.
The Address Books Configuration page appears. Table 47 explains the contents of this page.
- Click one:
- Add—Adds an address book configuration. Enter information as specified in Table 48.
- Edit—Edits the selected address book configuration.
- Delete—Deletes the selected address book configuration.
- Click one:
- OK—Saves the configuration and returns to the main configuration page.
- Commit Options>Commit—Commits the configuration and returns to the main configuration page.
- Cancel—Cancels your entries and returns to the main configuration page.
Table 47: Address Books Configuration Page
|
Field |
Function |
|---|---|
| Address Books | |
|
Address Book Name |
Displays the address book name. |
|
Attached Zone |
Displays the name of the zone that is attached to the address book. |
|
Global |
Displays information about the predefined address book. The global address book is available by default to all security zones. You do not need to attach a security zone to the global address book. |
|
Address/Address-Set Name |
Displays the addresses and address sets associated with the selected address book. |
|
Address Value |
Displays the IP address. |
|
Address-Set Members |
Displays the addresses in an address set. |
Table 48: Add Address Books/Address Sets Configuration Details
| Field | Function | Action |
|---|---|---|
| Add Address Book | ||
|
Address Book Name |
Specifies the address book name. |
Enter a name for the address book. |
|
Attach Zones |
Specifies which of the predefined zones should be attached to the specified address. |
Select the zones from the Available list and use the Right Arrow to move them to the Attached list. You can select more than one zone from the Attached list for one address book. However, make sure that each zone has only one address book attached to it. If there is more than one address book attached to a zone, you will get the following error when you commit the configuration: “Security zone must be unique in address books.” |
| Add Address | ||
|
Address Name |
Specifies the address name. |
Enter a name for the address. |
|
Address Type |
Specifies the type of address. |
Select the address type from the list. The options available are:
|
|
Value |
Specifies the address. |
Enter an address that matches the selected address type. |
| Add Address Set | ||
|
Address Set Name |
Specifies the address set name. |
Enter the address set name. |
|
Address List |
Specifies which of the preexisting addresses should be included or excluded from the address set. |
Select the addresses and use the arrows to move them to the Out of This Set and In This Set lists. |
|
Address Set List |
Specifies which of the preexisting address sets should be included or excluded from the list. |
Select the address sets and use the arrows to move them to the Out of This Set and In This Set lists. |