Monitoring RIP Routing Information
Purpose
View RIP routing information, including a summary of RIP neighbors and statistics.
Action
Select Monitor>Routing>RIP Information in the J-Web user interface, or enter the following CLI commands:
- show rip statistics
- show rip neighbors
Table 242 summarizes key output fields in the RIP routing display in the J-Web user interface.
Table 242: Summary of Key RIP Routing Output Fields
|
Field |
Values |
Additional Information |
|---|---|---|
| RIP Statistics | ||
|
Protocol Name |
The RIP protocol name. |
– |
|
Port number |
The port on which RIP is enabled. |
– |
|
Hold down time |
The interval during which routes are neither advertised nor updated. |
– |
|
Global routes learned |
Number of RIP routes learned on the logical interface. |
– |
|
Global routes held down |
Number of RIP routes that are not advertised or updated during the hold-down interval. |
– |
|
Global request dropped |
Number of requests dropped. |
– |
|
Global responses dropped |
Number of responses dropped. |
– |
| RIP Neighbors | ||
|
Details |
Tab used to view the details of the interface on which RIP is enabled. |
– |
|
Neighbor |
Name of the RIP neighbor. |
This value is the name of the interface on which RIP is enabled. Click the name to see the details for this neighbor. |
|
State |
State of the RIP connection: Up or Dn (Down). |
– |
|
Source Address |
Local source address. |
This value is the configured address of the interface on which RIP is enabled. |
|
Destination Address |
Destination address. |
This value is the configured address of the immediate RIP adjacency. |
|
Send Mode |
The mode of sending RIP messages. |
– |
|
Receive Mode |
The mode in which messages are received. |
– |
|
In Metric |
Value of the incoming metric configured for the RIP neighbor. |
– |