IGMP Snooping Configuration Page Options
- Select Configure>Switching>IGMP Snooping in
the J-Web user interface.
The IGMP Snooping configuration page appears. Table 132 explains the contents of this page.
- Click one:
- Add—Adds a new or duplicate IGMP snooping configuration. Enter information as specified in Table 133.
- Edit—Edits a selected IGMP snooping configuration.
-
Delete—Deletes the selected IGMP snooping
configuration.
If you delete a configuration, the VLAN configuration for all the associated interfaces is also deleted.
- Disable Vlan—Disables IGMP snooping on the selected VLAN.
- Click one:
- OK—Saves the configuration and returns to the main configuration page.
- Commit Options>Commit—Commits the configuration and returns to the main configuration page.
- Cancel—Cancels your entries and returns to the main configuration page.
Table 132: IGMP Snooping Configuration Page
|
Field |
Function |
|---|---|
|
VLAN Name |
Displays the VLAN on which IGMP snooping is enabled. |
|
Status |
Displays the status of the VLAN. |
| Details of VLAN | |
|
Immediate Leave |
Displays whether the Immediate Leave option is enabled. |
|
Query Interval |
Displays the frequency, in seconds, at which the switch sends host-query timeout messages to a multicast group. |
|
Query Last Member Interval |
Displays the interval, in seconds, between group-specific query timeout messages sent by the switch. |
|
Query Response Interval |
Displays the duration, in seconds, the switch waits to receive a response to a specific query message from a host. |
|
Robust Count |
Displays the number of timeout intervals that the switch waits before timing out a multicast group. |
|
Interfaces List |
Displays the interface that is configured as a switching interface. |
Table 133: Add IGMP Snooping Configuration Details
|
Field |
Function |
Action |
|---|---|---|
|
VLAN Name |
Specifies the VLAN on which IGMP snooping has to be enabled. |
Select the VLAN from the list. |
|
Immediate Leave |
Specifies to immediately remove a multicast group member from an interface when it receives a Leave message from that interface and to suppress the sending of any group-specific queries for the multicast group. |
To enable the option, select the check box. To disable the option, clear the check box. |
|
Query Interval |
Specifies how frequently, in seconds, the switch sends host-query timeout messages to a multicast group. |
Enter a value from 1 through 1024 seconds. |
|
Query Last Member Interval |
Specifies the interval, in seconds, l between group-specific query timeout messages sent by the switch. |
Enter a value from 1 through 1024 seconds. |
|
Query Response Interval |
Specifies the duration, in seconds, that the switch waits to receive a response to a specific query message from a host. |
Enter a value from 1 through 25 seconds. |
|
Robust Count |
Specifies the number of timeout intervals that the switch waits before timing out a multicast group. |
Enter a value from 2 through 10. |
|
Interfaces List |
Specifies to statically configure an interface as a switching interface to receive multicast traffic. |
|