Destination Configuration Page Options

  1. Select Configure>NAT>Destination in the J-Web user interface.

    The Destination NAT configuration page appears. Table 37 explains the contents of this page.

  2. Click one:
    • Add—Adds a new or duplicate destination NAT configuration. Enter information as specified in Table 38.
    • Edit—Edits the selected destination NAT configuration.
    • Delete—Deletes the selected destination NAT configuration.
    • Launch Wizard— Launches the NAT wizard with destination NAT as the default NAT type.

      The Launch Wizard option is not supported on high-end SRX Series devices.

  3. Click one:
    • OK—Saves the configuration and returns to the main configuration page.
    • Commit Options>Commit—Commits the configuration and returns to the main configuration page.
    • Cancel—Cancels your entries and returns to the main configuration page.

Table 37: Destination NAT Configuration Page

Field

Function

Destination NAT Rule Set

From

Displays the destination NAT sort options from which the packets flow.

The following options are available:

  • Routing Instance
  • Zone
  • Interface

Filter

Displays the filter option.

Name

Displays the name of the destination NAT rule set.

From

Displays the name of the routing instance/zone/interface from which the packets flow.

Rule

Displays the name of the rule in the selected destination NAT rule set.

Description

Displays a description of the destination NAT rule set.

Rules in Selected Rule-Set

Rule Name

Displays the name of the rule in the selected destination NAT rule set.

Match Source

Displays the match source address.

Match Destination

Displays the match destination address.

Match IP Protocol

Displays the match IP protocol.

Match Destination Port

Displays the match destination port.

Action

Displays the action of the rule in the selected rule set.

Upper Threshold

Displays the upper threshold at which an SNMP trap is triggered.

Lower Threshold

Displays the lower threshold at which an SNMP trap is triggered.

Description

Displays a description of the rule in the selected destination NAT rule set.

Destination NAT Pool

Name

Displays the name of the destination NAT pool.

Address

Displays the IP address of the destination NAT pool.

Port

Displays the port address of the destination NAT pool.

Description

Displays a description of the destination NAT pool.

Table 38: Add Destination NAT Rule Set Configuration Details

Field FunctionAction
Destination Rule Set
Add Rule Set

Rule Set Name

Specifies the name of the rule set.

Enter the rule set name.

Rule Set Description

Specifies a description for the rule set.

Enter a description for the rule set.

From

Specifies the filter options. The following options are available:

  • Routing Instance
  • Zone
  • Interface

Select an option.

Select the routing instances/zones/interfaces in the Available column and the use the right arrow to move them to the Selected column.

Add Rule

Rule Name

Specifies the name of the rule.

Enter the rule name.

Rule Description

Specifies a description for the rule.

Enter a description for the rule.

Match

Source Address

Specifies the source IP address. The following options are available:

  • Available—Specifies the available source IP addresses.
  • Selected—Specifies the selected source addresses.

Search for and select the source addresses in the Available column, and then use the right arrow to move them to the Selected column.

Optionally, enter a source address in the New text box and then click Add to add it to the list of IP addresses.

IP Protocol

Specifies the IP protocol for the NAT rule.

Enter the protocol name in the text box and click Add to add the protocol.

Destination Address

Specifies the destination IP address.

Enter the destination IP address.

Port

Specifies the destination port number.

Enter the destination port number.

Actions

Specifies the actions for the destination NAT pool. The following options are available:

  • No Destination NAT.
  • Do Destination NAT With Pool—The user-defined address pool is used to perform destination NAT.

Select an option.

When you select Do Destination NAT With Pool, you can select a pool from the list or add a new pool by clicking Add New Pool.

Upper Threshold

Specifies that an SNMP trap is triggered when the session count for the specific rule falls below the high threshold.

Enter a session number.

Lower Threshold

Specifies that an SNMP trap is triggered when the session count for the specific rule falls below the low threshold.

Enter a session number.

 
Add Destination Pool

Pool Name

Specifies the name of the destination pool.

Enter the destination pool name.

Pool Description

Specifies a description for the destination pool.

Enter a description for the destination pool.

Routing Instance

Specifies the routing instance available.

Select an option.

Pool Addresses and Port

Address/Port

Specifies the destination pool address.

Enter the destination pool address.

Port

Specifies the destination pool port number.

Enter the destination pool port number.

Address Range

Specifies the destination pool address range.

Enter the destination pool address range.

Related Documentation