Link Aggregation Configuration Page Options

Select Configure>Interface>Link Aggregation in the J-Web user interface.
The link aggregation configuration page appears. Table 20 explains the contents of this page.
Click one:
- Device Count—Creates an Link Aggregated Ethernet interface, or LAG. You can choose the number of device that you want to create. Enter information as specified in Table 21.
- Add—Adds a new link aggregation configuration. Enter information as specified in Table 22.
- Edit—Edits a selected link aggregation configuration.
- Delete—Deletes a selected link aggregation configuration.
- Disable Port/Enable Port—Disables or enables the configured port.
Click one:
- OK—Saves the configuration and returns to the main configuration page.
- Commit Options>Commit—Commits the configuration and returns to the main configuration page.
- Cancel—Cancels your entries and returns to the main configuration page.

Table 20: Link Aggregation Configuration Page

Field	Function
Aggregated Interface	Displays the name of the aggregated interface.
Link Status	Displays whether the interface is linked (Up) or not linked (Down).
VLAN (VLAN ID)	Displays the Virtual LAN identifier value for IEEE 802.1Q VLAN tags (0.4094).
Description	Provides a description of the LAG.
Details of Aggregation
Name	Displays the name of the select LAG.
Value	Displays the value of the LAG.

Table 21: Device Count Link Aggregation Configuration Page

Field	Function	Action
Enable aggregation	Specifies the option to enable aggregation.	Select the option.
Device Count	Specifies the device count.	Enter the device count.

Table 22: Add Link Aggregation Configuration Details

Field	Function	Action
Aggregated Interface	Specifies the name of the aggregated interface. If an aggregated interface already exists, then the field is displayed as read-only.	Enter the aggregated interface name.
LACP Mode	Specifies the mode in which Link Aggregation Control Protocol packets are exchanged between the interfaces. The modes are: None—Indicates that no mode is applicable. Active—Indicates that the interface initiates transmission of LACP packets Passive—Indicates that the interface only responds to LACP packets.	Select an option.
Description	Provides a description for the LAG.	Enter a description.
Interface	Displays the interfaces available for aggregation. The options available are: Add—Adds the interface. Remove—Removes the interface. Note: Only interfaces that are configured with the same speed can be selected together for a LAG.	Select an option.
Speed	Displays the speed of the interface. Add—Adds the interface. Remove—Removes the interface.	Select an option.
Enable Log	Specifies whether or not to enable generation of log entries for a LAG.	Select to enable log generation.