User Management Configuration Page Options
- Select Configure>System Properties>User Management in the J-Web user interface
if you are using SRX5400, SRX5600, or SRX5800 platform.
Or
Select Configure>Device Setup>Basic Settings>User Management in the
J-Web user interface.
The User Management
configuration page appears. Table 103 explains the contents of this page.
- Click Edit or / to edit the user management
configuration. Enter information as specified in Table 104.
- Click one:
- OK—Saves the configuration and returns
to the main configuration page.
- Commit Options>Commit—Commits the configuration
and returns to the main configuration page.
- Cancel—Cancels your entries and returns
to the main configuration page.
Table 103: User
Management Configuration Page
Field | Function |
|---|
Users | Displays the users connected to the device’s local
database. |
Authentication Methods | Displays the authentication method the device uses to
authenticate users. |
RADIUS Servers | Displays the RADIUS server details. |
TACACS Servers | Displays the TACACS server details. |
Table 104: Add
User Management Configuration Details
| Field | Function | Action |
|---|
| Users |
User Name | Specifies the users to the device’s local database.
The options available are: | Select an option: - To add a new user, click Add. Then enter the
details specified below and click OK.
- User name—Enter a unique name for the
user. Do not include spaces, colons, or commas in the username.
- User ID—Enter a unique ID for the user.
- Full Name—Enter the user’s full
name. If the full name contains spaces, enclose it in quotation marks.
Do not include colons or commas.
- Password—Enter a login password for the
user. The login password must meet the following criteria:
- The password must be at least 6 characters long.
- You can include most character classes in a password (alphabetic,
numeric, and special characters), except control characters.
- The password must contain at least one change of case
or character class.
- Confirm password—Re-enter the login password
for the user.
- Login Class—Select the user’s access
privilege from the following options:
- super-user
- operator
- read-only
- unauthorized
- To edit the information of a user, select it and click Edit. Then edit the user details in the Edit User dialog box
and click Ok.
- To delete an existing user, select it and click Delete.
|
| Authentication
Method And Order |
Authentication Method And Order | Specifies the authentication method the device should
use to authenticate users. The options available are: | Use the arrows to move the item to the Selected Methods
list. |
| RADIUS |
RADIUS Servers | Specifies the details of RADIUS servers. The available
options are: | Select an option: - To add a new RADIUS server, click Add. Then
enter the details specified below and click OK.
- IP Address—Enter the server’s 32–bit
IP address.
- Password—Enter the secret password for
the server.
- Confirm Password—Re-enter the secret
password for the server.
- Server Port—Enter an appropriate port.
- Source Address—Enter the source IP address
of the server.
- Time out—Specify the amount of time (in
seconds) the device should wait for a response from the server.
- Retry Attempts—Specify the number of
times that the server should try to verify the user’s credentials.
- To edit the information of an existing RADIUS server,
select it and click Edit. Then edit the server content
in the Edit RADIUS Server dialog box and click OK.
- To delete an existing RADIUS server, select it and click Delete.
|
| TACACS |
TACACS Servers | Specifies the details of TACACS servers. The available
options are: | Select an option: - To add a new TACACS server, click Add. Then
enter the details specified below and click OK.
- IP Address—Enter the server’s 32–bit
IP address.
- Password—Enter the secret password for
the server.
- Confirm Password—Re-enter the secret
password for the server.
- Server Port—Enter an appropriate port.
- Source Address—Enter the source IP address
of the server.
- Time out—Specify the amount of time (in
seconds) the device should wait for a response from the server.
- Retry Attempts—Specify the number of
times that the server should try to verify the user’s credentials.
- To edit the information of an existing TACACS server,
select it and click Edit. Then edit the server content
in the Edit TACACS Server dialog box and click OK.
- To delete an existing TACACS server, select it and click Delete.
|
Related Documentation