Monitoring Static NAT Information

Purpose

View static NAT rule information.

Action

Select Monitor>NAT>Static NAT in the J-Web user interface, or enter the following CLI command:

show security nat static rule

Table 40 summarizes key output fields in the static NAT display.

Table 40: Summary of Key Static NAT Output Fields

Field

Values

Action

Rule-set Name

Name of the rule set.

Select all rule sets or a specific rule set to display from the list.

Total rules

Number of rules configured.

ID

Rule ID number.

Position

Position of the rule that indicates the order in which it applies to traffic.

Name

Name of the rule.

Ruleset Name

Name of the rule set.

From

Name of the routing instance/interface/zone from which the packet comes

Source addresses

Source IP addresses.

Source ports

Source port numbers.

Destination addresses

Destination IP address and subnet mask.

Destination ports

Destination port numbers .

Host addresses

Name of the host addresses.

Host ports

Host port numbers.

Netmask

Subnet IP address.

Host routing instance

Name of the routing instance from which the packet comes.

Alarm threshold

Utilization alarm threshold.

Sessions (Succ/
Failed/
Current)

Successful, failed, and current sessions.

  • Succ–Number of successful session installations after the NAT rule is matched.
  • Failed–Number of unsuccessful session installations after the NAT rule is matched.
  • Current–Number of sessions that reference the specified rule.

Translation hits

Number of times a translation in the translation table is used for a static NAT rule.

Top 10 Translation Hits Graph

Displays the graph of top 10 translation hits.

Related Documentation