Schedulers Configuration Page Options

  1. Select Configure>Class of Service>Schedulers.

    The Configure Schedulers configuration page appears. Table 160 explains the contents of this page.

  2. Click one:
    • Global Setting—Enable or disable non-strict priority to all the schedulers globally. Enter information as specified in Table 159.
    • Add—Adds a new or duplicate configuration of schedulers. Enter information as specified in Table 161.
    • Edit—Edits the configuration of selected schedulers.
    • Delete—Deletes the configuration of selected schedulers.
  3. Click one:
    • OK—Saves the configuration and returns to the main configuration page.
    • Commit Options>Commit—Commits the configuration and returns to the main configuration page.
    • Cancel—Cancels your entries and returns to the main configuration page.

Table 159: Schedulers Global Setting

Field

Function

Enable Non Strict Priority

Applies non-strict priority policy to all the schedulers.

Table 160: Schedulers Configuration Page

Field

Function

Scheduler name

Displays the names of defined schedulers.

Scheduler priority

Displays the scheduler transmission priority, which determines the order in which an output interface transmits traffic from the queues.

Details of scheduler

Name

Displays the scheduler name.

Value

Displays the CoS value.

Table 161: Add Schedulers Configuration Details

Field FunctionAction

Scheduler name

Specifies the name of a scheduler.

Enter the scheduler name.

Scheduler priority

Specifies scheduler transmission priority, which determines the order in which an output interface transmits traffic from the queues.

Select the scheduler priority from the list.

  • high—Packets in this queue have high priority.
  • low—Packets in this queue are transmitted last.
  • medium-low—Packets in this queue have medium-low priority.
  • medium-high—Packets in this queue have medium-high priority.
  • strict-high—Packets in this queue are transmitted first.

Buffer size

Specifies the size of the delay buffer.

Select one of the options from the list.

  • exact—Exact buffer size.
  • percent—Percentage of the total buffer. Select and type an integer from 1 through 100.
  • remainder—Remaining available buffer size.
  • temporal—Temporal value in microseconds.

Shaping rate

Specifies the minimum bandwidth allocated to a queue.

Select one of the options from the list.

  • rate—Shaping rate as an absolute number of bits per second. Select and type an integer from 3200 through 160,000,000,000 bits per second.
  • percent—Shaping rate as a percentage. Select and type an integer from 0 through 100.

Transmit rate

Specifies the transmission rate of a scheduler.

Select one of the options from the list.

  • rate—Transmit rate. Select and type an integer from 3200 through 160,000,000,000 bits per second.
  • exact—Exact transmit rate.
  • percent—Percentage of transmission capacity. Select and type an integer from 1 through 100.
  • remainder—Remaining transmission capacity.

Related Documentation

Copyright© 2017 Juniper Networks, Inc. All rights reserved.