VLAN Configuration Page Options

  1. Select Configure> in the J-Web user interface.

    The VLAN configuration page appears.

  2. Click one:
    • Global Options—Configures global Options. Enter information as specified in Table 279
    • Add—Adds a new or duplicate code point alias configuration. Enter information as specified in Table 279
    • Edit—Edits the selected VLAN configuration.
    • Delete—Deletes the selected VLAN configuration.
  3. Click one:
    • OK—Saves the configuration and returns to the main configuration page.
    • Cancel—Cancels your entries and returns to the main configuration page.
    • Remove—Removes the selected interface from the list.

Table 279: VLAN Configuration Details

FieldFunctionAction
VLAN list

VLAN Name

Specifies the name of the VLAN.

Displays the name of the configured VLAN.

Description

Specifies information about the VLAN.

Displays the description of the VLAN.

VLAN ID

Specifies a VLAN identifier to include in the packets forwarded on the VLAN.

Displays the VLAN ID details.

  • number—A valid VLAN identifier. If you configure multiple VLANs with a valid VLAN identifier, you must specify a unique VLAN identifier for each VLAN.
  • none—Specify that shared VLAN learning is enabled.

Routing Interface

Specifies a routing interface to include in a VLAN.

Displays the name of the integrated routing and bridging (IRB) interface to include in the VLAN.

Global Options
MAC Learning Options

Global MAC Limit

Limits the number of media access control (MAC) addresses learned from the logical interfaces on the router.

Enter a value in the range of 20 through 131071 to specify the limit for MAC addresses. The default value is 131071.

Packet Action

Specifies that packets for new source MAC addresses be dropped after the MAC address limit is reached.

Select an option. The default option is disabled.

No Global Mac Learning

Activates or deactivate the option.

Select the check box to activate this option.

Flow Options

Set 802.1D BPDU flooding

Sets 802.1D BPDU flooding

Select the check box to activate this option.

Non IP Traffic

Allow

Allows non-IP traffic.

Select the radio button.

Block

Blocks non-IP traffic.

Select the radio button.

Stop IP flooding and send ICMP/ARP (Select the check box to activate this option.)

No trace route

Allows the device to discover the destination MAC address for a unicast packet if the destination IP address is in the same subnetwork as the ingress IP address.

Select the check box to activate this option.

Add VLAN
General

VLAN Name

Specifies the name of the VLAN.

Configure Layer 2 learning and forwarding properties for a VLAN.

Description

Specifies the VLAN information.

Enter a description for the VLAN configured.

Routing Interfaces

Specifies a routing interface to include in a VLAN.

Enter the name of the integrated routing and bridging (IRB) interface to include in the VLAN. The format of the interface name is irb.x, where x is the unit number of the interface you configured at the [edit interfaces irb] hierarchy level.

VLAN ID

Specifies a VLAN identifier to include in the packets forwarded on the VLAN.

Enter a valid VLAN identifier. If you configure multiple VLANs with a valid VLAN identifier, you must specify a unique VLAN identifier for each VLAN.

VLAN ID List

VLAN ID List

Displays a list of valid VLAN identifiers. A VLAN is created for each VLAN identifier in the list.

Add a new VLAN ID to the list or remove a VLAN ID from the list.

Add VLAN ID
Add VLAN Id/List

VLAN ID

Specifies a VLAN identifier to include in the packets forwarded on the VLAN.

Check the radio button and enter a valid and unique VLAN identifier.

VLAN List

Specifies the VLAN list.

Check the radio button and enter a valid VLAN list value.

L2 Interfaces

L2 Interfaces

Displays the L2 Interface that is configured.

Add a new interface. Edit or remove the existing interface.

Add L2 Interfaces

Interface name

Specifies the configured interface.

Configure a new interface under the VLAN.

Static MAC Address
Add Static MAC Address

Mac Address

Specifies the Mac address of the interface.

Assign a Mac address to the newly added interface.

Related Documentation