Destination NAT Configuration Page Options
- Select Configure>NAT>Destination NAT in the
J-Web user interface.
The Destination NAT configuration page appears. Table 37 explains the contents of this page.
- Click one:
- Add—Adds a new or duplicate destination NAT configuration. Enter information as specified in Table 38.
- Edit—Edits the selected destination NAT configuration.
- Delete—Deletes the selected destination NAT configuration.
- Click one:
- OK—Saves the configuration and returns to the main configuration page.
- Commit Options>Commit—Commits the configuration and returns to the main configuration page.
- Cancel—Cancels your entries and returns to the main configuration page.
Table 37: Destination NAT Configuration Page
Field | Function |
|---|---|
| Destination NAT Rule Set | |
From | Displays the destination NAT sort options from which the packets flow. The following options are available:
|
Filter | Displays the filter option. |
Name | Displays the name of the destination NAT rule set. |
From | Displays the name of the routing instance/zone/interface from which the packets flow. |
Rule | Displays the name of the rule in the selected destination NAT rule set. |
Description | Displays a description of the destination NAT rule set. |
| Rules in Selected Rule-Set | |
Rule Name | Displays the name of the rule in the selected destination NAT rule set. |
Match Source | Displays the match source address. |
Match Destination | Displays the match destination address. |
Match IP Protocol | Displays the match IP protocol. |
Match Destination Port | Displays the match destination port. |
Action | Displays the action of the rule in the selected rule set. |
Upper Threshold | Displays the upper threshold at which an SNMP trap is triggered. |
Lower Threshold | Displays the lower threshold at which an SNMP trap is triggered. |
Description | Displays a description of the rule in the selected destination NAT rule set. |
| Destination NAT Pool | |
Name | Displays the name of the destination NAT pool. |
Address | Displays the IP address of the destination NAT pool. |
Port | Displays the port address of the destination NAT pool. |
Description | Displays a description of the destination NAT pool. |
Table 38: Add Destination NAT Rule Set Configuration Details
| Field | Function | Action |
|---|---|---|
| Destination Rule Set | ||
| Add Rule Set | ||
Rule Set Name | Specifies the name of the rule set. | Enter the rule set name. |
Rule Set Description | Specifies a description for the rule set. | Enter a description for the rule set. |
| From | Specifies the filter options. The following options are available:
| Select an option. Select the routing instances/zones/interfaces in the Available column and the use the right arrow to move them to the Selected column. |
| Add Rule | ||
Rule Name | Specifies the name of the rule. | Enter the rule name. |
Rule Description | Specifies a description for the rule. | Enter a description for the rule. |
| Match | ||
Source Address | Specifies the source IP address. The following options are available:
| Search for and select the source addresses in the Available column, and then use the right arrow to move them to the Selected column. Optionally, enter a source address in the New text box and then click Add to add it to the list of IP addresses. |
IP Protocol | Specifies the IP protocol for the NAT rule. | Enter the protocol name in the text box and click Add to add the protocol. |
Destination Address | Specifies the destination IP address. | Enter the destination IP address. |
Port | Specifies the destination port number. | Enter the destination port number. |
| Actions | Specifies the actions for the destination NAT pool. The following options are available:
| Select an option. When you select Do Destination NAT With Pool, you can select a pool from the list or add a new pool by clicking Add New Pool. |
Upper Threshold | Specifies that an SNMP trap is triggered when the session count for the specific rule falls below the high threshold. | Enter a session number. |
Lower Threshold | Specifies that an SNMP trap is triggered when the session count for the specific rule falls below the low threshold. | Enter a session number. |
| Add Destination Pool | ||
Pool Name | Specifies the name of the destination pool. | Enter the destination pool name. |
Pool Description | Specifies a description for the destination pool. | Enter a description for the destination pool. |
Routing Instance | Specifies the routing instance available. | Select an option. |
| Pool Addresses and Port | ||
Address/Port | Specifies the destination pool address. | Enter the destination pool address. |
Port | Specifies the destination pool port number. | Enter the destination pool port number. |
Address Range | Specifies the destination pool address range. | Enter the destination pool address range. |