Monitoring Chassis Information

Purpose

View chassis properties, which include the status of hardware components on the device.

Action

To view these chassis properties, select Monitor>System View>Chassis Information in the J-Web user interface.

Do not install a combination of Physical Interface Modules (PIMs) in a single chassis that exceeds the maximum power and heat capacity of the chassis. If J Series power management is enabled, PIMs that exceed the maximum power and heat limits remain offline when the chassis is powered on. To check PIM power and heat status, use the show chassis fpc and show chassis power-ratings commands.

The Chassis Information page displays the following types of information:

To control which component details appear, select a hardware component from the Select component list.

Alternatively, you can view chassis details by entering the following show commands in the CLI configuration editor:

Related Documentation