802.1x Configuration Page Options

Select Configure>Security>802.1x in the J-Web user interface.
The 802.1x configuration page appears. Table 94 explains the contents of this page.
Click one:
- RADIUS Servers—Adds a new or duplicate RADIUS servers configuration. Enter information as specified in Table 95.
- Exclusion List—Adds a new or duplicate exclusion list configuration. Enter information as specified in Table 96.
- Add—Adds a new or duplicate 802.1x configuration. Enter information as specified in Table 97.
- Edit—Edits the selected 802.1x configuration.
- Delete—Deletes the selected 802.1x configuration.
Click one:
- OK—Saves the configuration and returns to the main configuration page.
- Commit Options>Commit—Commits the configuration and returns to the main configuration page.
- Cancel—Cancels your entries and returns to the main configuration page.

Table 94: 802.1x Configuration Page

Field	Function
Port	Displays the ports.
802.1X Status	Displays the status of the port as Disabled or Enabled.
Details of 802.1X configuration on port
Name	Displays the name of the settings.
Value	Displays the Value of the settings.

Table 95: Add Radius Server Configuration Details

Field	Function	Action
IP Address	Specifies the IP address of the server.	Enter the IP address in dotted decimal notation.
Password	Specifies the login password.	Enter the password.
Confirm Password	Verifies the login password for the server.	Re-enter the password.
Server Port Number	Specifies the port with which the server is associated.	Enter the port number.
Source Address	Specifies the source address of the SRX Series device for communicating with the server.	Enter the IP address in dotted decimal notation.
Retry Attempts	Specifies the number of login retries allowed after a login failure.	Enter the number.
Timeout	Specifies the time interval to wait before the connection to the server is closed.	Enter the interval in seconds.

Table 96: Add 802.1X Exclusion List Configuration Details

Field	Function	Action
MAC Address	Specifies the media access control address to be excluded from 802.1X authentication.	Enter the MAC address.
Exclude if connected through the port	Specifies that a supplicant can bypass authentication if it is connected through a particular interface.	Select the option and then select the port through which the supplicant is connected.
Move the host to the VLAN	Moves the host to a specific virtual LAN once the host is authenticated.	Select the option and then select the VLAN from the list.

Table 97: Add 802.1X Port Settings Configuration Details

Field	Function	Action

Supplicant Mode	Specifies the authentication strategy and the number of hosts permitted on the port. The options available are: Single— Allows only one host for authentication. Multiple—Allows multiple hosts for authentication. Each host is checked before being admitted to the network. Single authentication for multiple hosts—Allows multiple hosts but only the first is authenticated.	Select an option.
Enable re-authentication	Specifies enabling re-authentication on the selected interface.	Select enable reauthentication. Enter the timeout for reauthentication in seconds.
Action for nonresponsive hosts	Specifies the action to be taken in case a supplicant is non-responsive. The options available are: Move to the Guest VLAN— Moves the supplicant to the specified Guest VLAN. Deny—Blocks access to the supplicant.	Select an action.
Timeouts	Specifies timeout values for the following options: Number of retries. Maximum EAPOL requests. Quiet period after authentication failure, in seconds. Transmit period for initial EAPOL PDUs, in seconds. Supplicant timeout, in seconds. RADIUS server timeout, in seconds.	Enter timeout values for all options.