Maintaining Reboot Schedule

Select Maintain>Reboot.

The Reboot maintain page appears.

Provide the information specified in Table 252 to maintain the secure router.

Table 252: Reboot Schedule Maintenance Options

Field

Function

Action

Reboot Immediately

Reboots the device immediately.

Select this option to reboot the device immediately.

Reboot in number of minutes

Reboots the device in the number of minutes from the current time.

Select this option to reboot the device after the specified number of minutes from the current time.

Reboot when the system time is hour:minute

Reboots the device at the absolute time that you specify, on the current day.

Select a two-digit hour in 24-hour format and a two-digit minute.

Halt Immediately

Stops the device software immediately. After the software has stopped, you can access the device through the console port only.

Select this option to stop the device immediately.

Reboot From Media

Reboots the device from the specified media type.

Choose the boot device from the Reboot From Media list:

  • internal—Reboots from the internal media (default).
  • usb—Reboots from the USB storage device.

Message

Displays a message to the user on the device before the reboot occurs.

Type a message to be displayed to the user on the device before the reboot occurs.

Schedule

Schedules a reboot based on the information specified in the previous fields.

Select this option to schedule a reboot. The J-Web interface requests confirmation to perform the reboot or to halt. Click:

  • OK— Confirms the operation.
    • If the reboot is scheduled to occur immediately, the device reboots. You cannot access J-Web until the device has restarted and the boot sequence is complete. After the reboot is complete, refresh the browser window to display the J-Web login page.
    • If the reboot is scheduled to occur in the future, the Reboot page displays the time until reboot. You have the option to cancel the request by clicking Cancel Reboot on the J-Web interface Reboot page.
    • If the device is halted, all software processes stop and you can access the device through the console port only. Reboot the device by pressing any key on the keyboard.

      Note: If you cannot connect to the device through the console port, shut down the device by pressing and holding the power button on the front panel until the POWER LED turns off. After the device has shut down, you can power on the device by pressing the power button again. The POWER LED lights during startup and remains steadily green when the device is operating normally.

  • Cancel—Cancels your entries and returns to the main configuration page.

Related Documentation