Static NAT Configuration Page Options

Select Configure >NAT>Static NAT.
The Static NAT configuration page appears. Table 36 explains the contents of this page.
Click one:
- Add—Adds a new or duplicate static NAT configuration. Enter information as specified in Table 37.
- Edit—Edits the selected static NAT configuration.
- Delete—Deletes the selected static NAT configuration.
Click one:
- OK—Saves the configuration and returns to the main configuration page.
- Cancel—Cancels your entries and returns to the main configuration page.

Table 36: Static NAT Configuration Page

Field	Function
Static NAT Rule Set
From	Displays the destination NAT sort options from which the packets flow. The options available are: Routing Instance Zone Interface
Filter	Displays the filter option.
Name	Displays the name of the static NAT rule set.
From	Displays the name of the routing instance/zone/interface from which the packets flow.
Rule	Displays the name of the rule in the selected static NAT rule set.
Description	Displays a description of the static NAT rule set.
Rules in Selected Rule-Set
Rule Name	Displays the name of the routing instance/zone/interface to which the packet flows.
Match Destination	Displays the match destination address.
Action	Displays the action of the rule in the selected rule set.
Description	Displays a description of the rule in the selected static NAT rule set.

Table 37: Add Static NAT Configuration Details

Field	Function	Action
Add Rule Set
Rule Set Name	Specifies the name of the rule set.	Enter the rule set name.
Rule Set Description	Specifies a description for the rule set.	Enter a description for the rule set.
From	Specifies the filter options. The options available are: Routing Instance Zone Interface	Select an option. Select the routing instances/zones/interfaces in the Available column and the use the right arrow to move them to the Selected column.
Add Rule
Rule Name	Specifies the name of the rule.	Enter the rule name.
Rule Description	Specifies a description for the rule.	Enter a description for the rule.
Match Destination Address
IPv4	Specifies the IPv4 address.	Enter the IPv4 address.
IPv6	Specifies the IPv6 address.	Enter the IPv6 address.
Then
Static Prefix	Specifies the static prefix.	Enter the static prefix address.
Routing Instance	Specifies the routing instance.	Select a routing instance.