Monitoring IDP Status
To view Intrusion Detection and Prevention (IDP) table information, select Monitor>Security>IDP>Status in the J-Web interface, or enter the following CLI command:
- show security idp status
- show security idp memory
Table 186 summarizes key output fields in the IDP display.
Table 186: Summary of IDP Status Output Fields
Field | Values | Additional Information |
|---|---|---|
| IDP Status | ||
Status of IDP | Displays the status of the current IDP policy. | |
Up Since | Displays the time from when the IDP policy first began running on the system. | |
Packets/Second | Displays the number of packets received and returned per second. | |
Peak | Displays the maximum number of packets received per second and the time when the maximum was reached. | |
Kbits/Second | Displays the aggregated throughput (kilobits per second) for the system. | |
Peak Kbits | Displays the maximum kilobits per second and the time when the maximum was reached. | |
Latency (Microseconds) | Displays the delay, in microseconds, for a packet to receive and return by a node . | |
Current Policy | Displays the name of the current installed IDP policy. | |
| IDP Memory Statistics | Displays the status of all IDP data plane memory. | |
PIC Name | Displays the name of the PIC. | |
Total IDP Data Plane Memory (MB) | Displays the total memory space, in megabytes, allocated for the IDP data plane. | |
Used (MB) | Displays the used memory space, in megabytes, for the data plane. | |
Available (MB) | Displays the available memory space, in megabytes, for the data plane. |