Chassis Cluster Setup Configuration Page Options
- Select Configure>Chassis Cluster>Setup.
The Chassis Cluster Setup configuration page appears. Table 159 explains the contents of this page.
- Click one:
- Enable—Enables cluster mode
on the node.
- Enable and Reboot—Enables cluster mode and reboots the node.
- Enable and No Reboot—Enables cluster mode without rebooting the node.
- Disable—Disables the cluster
mode on the node.
- Disable and Reboot—Disables cluster mode and reboots the node.
- Disable and No Reboot—Disables cluster mode without rebooting the node.
- Reset—Resets your entries to the original value.
- Enable—Enables cluster mode
on the node.
- Click one:
- OK—Saves the configuration and returns to the main configuration page.
- Commit Options>Commit—Commits the configuration and returns to the main configuration page.
- Cancel—Cancels your entries and returns to the main configuration page.
Table 159: Add Chassis Cluster Setup Configuration Details
| Field | Function | Action |
|---|---|---|
Cluster ID | Specifies the number by which a cluster is identified. | Enter a number from 0 through 15. |
| Node | ||
Node ID | Specifies the number by which a node is identified. | Enter a number from 0 through 1. |
Node Management IP Address (fxp0.0) | Specifies the management IP address of a node. | Enter a valid IP address for the management interface. |
| Control Link | ||
Fpc | Specifies the FPC control link. | Select the FPC number from the list. |
Port | Specifies the port to configure for the control link. | Enter a number from 0 through 2. |