Checking Active Alarms

To monitor alarms on the device, select Monitor>Events and Alarms>View Alarms in the J-Web user interface. The J-Web View Alarms page displays information about preset system and chassis alarms.

Alternatively, you can enter the following show commands in the CLI editor:

• show chassis alarms
• show system alarms

To view the node details, select a node from the following option:

• Select chassis cluster node— Available nodes: Node 0 and Node 1.

The J-Web View Alarms page displays the following information about each alarm:

• Type—Type of alarm: System, Chassis, or All.
• Severity—Severity class of the alarm: Minor or Major.
• Description—Description of the alarm.
• Time—Time that the alarm was registered.

To filter which alarms are displayed, use the following options:

• Alarm Type—Specify which type of alarm to monitor: System, Chassis, or All. System alarms include FRU detection alarms (power supplies removed, for instance). Chassis alarms indicate environmental alarms such as temperature.
• Severity—Specify the alarm severity that you want to monitor: Major, Minor, or All. A major (red) alarm condition requires immediate action. A minor (yellow) condition requires monitoring and maintenance.

• Description—Enter a brief synopsis of the alarms you want to monitor.
• Date From—Specify the beginning of the date range that you want to monitor. Set the date using the calendar pick tool.
• To—Specify the end of the date range that you want to monitor. Set the date using the calendar pick tool.
• Go—Executes the options that you specified.
• Reset—Clears the options that you specified.